Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Floorboard Finishing
-
2nd February 2006, 03:52 PM #1
Member
- Join Date
- Dec 2004
- Location
- Bentleigh, Melbourne
- Posts
- 81
Floorboard Finishing
Hi,
I have a 4mx4m room with vic ash boards which I will be sanding next week. Half the boards have old clear varnish on them (no stain) and I have replaced the other half with fresh boards due to wet rot. I've fixed the cause of the wet rot! Noe I'd like to stain the boards darker to match the rest of the house but would like to use a cabots water based urethane to finish due to ease of application, no smell and water clean up. Anyone have suggestions about stain?
Cheers!Help ma boab, the bairns goat it awe wrang!
-
3rd February 2006, 02:35 PM #2
Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 191
yea water based is good, use feastwatson prof range. if tinting use feastwatson proof tint base. WB is the way to go,
-
3rd February 2006, 03:29 PM #3
Member
- Join Date
- Dec 2004
- Location
- Bentleigh, Melbourne
- Posts
- 81
Cool,
had a look at feast watson site. Is stain in fungisheild ok under water based finish?Help ma boab, the bairns goat it awe wrang!
Reply With QuoteSimilar Threads
-
Finishing Masterclass?
By Auld Bassoon in forum FINISHINGReplies: 9Last Post: 2nd January 2006, 10:15 PM -
Finishing a marri table top
By grizzly_b in forum FINISHINGReplies: 2Last Post: 9th December 2003, 05:08 PM
