Results 1 to 2 of 2
-
17th July 2012, 01:14 PM #1New Member
- Join Date
- Jul 2012
- Location
- Mackay QLD
- Posts
- 1
Wax and water problems kitchen bench
Hi, we just installed a new kitchen and decided to stain the compressed bamboo benchtop, then polish over with wax. It was cooler weather and the wax coat was thick and we didn't polish the wax in straight away. So buff as much as we could later, the surface had lines where wax was thicker and touching leaves leaves finger marks etc. We tried buffing with an electric buffer/wool pad with no success.
The other problem is we're encountering water stains around the sink and other high use areas.
Any suggestions? We were thinking we might have to cut/sand back to the wood (dark stain could be a problem also) and apply a different sealer. Unless theres another way to deal with the wax.
Brent
-
17th July 2012, 04:36 PM #2
Sorry mate I think waxing your kitchen benchtop is just crazy. Where did you get the idea from? You should use oil based polyU or other similar products.
Visit my website at www.myFineWoodWork.com
Similar Threads
-
low water pressure only in kitchen
By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 16th November 2008, 07:10 AM -
Hot Water Pressure Problems
By DarrylF in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 6Last Post: 5th July 2006, 11:10 AM -
Water level problems in my toilet pan
By Baz in Brissy in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 22Last Post: 20th May 2005, 01:43 AM -
kitchen water proofing
By glaird in forum KITCHENSReplies: 3Last Post: 3rd September 2004, 09:48 AM
Bookmarks