Results 1 to 11 of 11
-
15th June 2018, 01:26 PM #1New Member
- Join Date
- Jun 2018
- Location
- NSW
- Posts
- 5
Want to find a picture rail substitute
I was planning to use picture rail moulding in my new mud brick house (don't want to nail or screw to bricks) however I am having trouble sourcing the moulding in small quantities. Bunnings have some (Porta Mouldings) but only in pine, whereas I was hoping to get a timber such as meranti or maple as it will take a stain similarly to other timber in my house. Can anyone suggest a combination of mouldings that will be closely equivalent to picture rail? - thicker and rounded at the top to accept a hook over the top, i mean. Alternatively another hanging solution that will work with more freely available timber moulding? Thanks in advance for any suggestions. I am in a country NSW area not the metro area.
-
15th June 2018, 01:37 PM #2
https://www.bunnings.com.au/66-x-18m...lding_p0090403
Turn it upside down, run an ovolo bit in a router over the square edge and bevel rear of it at 45 to 60 degrees. This mimics a fairly standard plain picture rail or use one of the colonial profiles
https://www.bunnings.com.au/tasmania...grade_p0070137
and do the same on the square edge and backThe person who never made a mistake never made anything
Cheers
Ray
-
17th June 2018, 10:13 AM #3GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 0
If you don't want to nail or screw to bricks, how do you propose to hang this picture rail?
If you want some spiffy-looking wood, I think you begin with raw stock and a router for DIY.
-
17th June 2018, 01:43 PM #4GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
17th June 2018, 08:36 PM #5Member
- Join Date
- Jun 2015
- Location
- Sydney
- Posts
- 21
-
17th June 2018, 09:39 PM #6GOLD MEMBER
- Join Date
- Apr 2018
- Location
- Nsw
- Age
- 64
- Posts
- 558
Do what RWBuild suggested if you don’t have access to other timberyards. You would have no problem sourcing it in Sydney in some of the restoration friendly suburbs
-
19th June 2018, 08:16 AM #7New Member
- Join Date
- Jun 2018
- Location
- NSW
- Posts
- 5
Just to say thank you for the replies to date. No solution yet (Sydney is 450km away unfortunately) but I am thinking laterally. cheers
-
23rd June 2018, 02:22 PM #8GOLD MEMBER
- Join Date
- May 2009
- Location
- melb
- Posts
- 67
By picture rail do you mean picture frame moulding? APM moulding has a huge selection. Just tell them you're an artist and they will sell to you with a minimum buy of $100. Over $500 free shipping.
-
15th July 2018, 06:02 PM #9New Member
- Join Date
- Jun 2018
- Location
- NSW
- Posts
- 5
No, picture rail is different to picture frame moulding. Picture rail is installed along the length of a wall.
-
23rd July 2018, 05:32 PM #10New Member
- Join Date
- Jun 2018
- Location
- NSW
- Posts
- 5
Problem solved
Just as a final note, when I finally brought together the half-splay moulding RWBuild suggested, and the actual hooks (called moulding hooks in the store) I found the hooks pretty much fitted firmly over the top even before doing anything. Rounded off the top front and back edges, PERFECTION. Thanks all
-
28th July 2018, 07:23 PM #11Senior Member
- Join Date
- Apr 2012
- Location
- Thornton NSW
- Posts
- 8
Good solution. I prefer the STAS system, as using the mini rail fitted just below the cornice is unobtrusive, it's not a cheap option by any means but great for modern decor.
Similar Threads
-
Picture Rail Height?
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 9th July 2016, 12:10 AM -
Timber profiles - picture rail and skirting
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 6th August 2009, 12:40 PM -
Chair/Picture rail holding...
By ubeaut in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 16th November 2008, 07:21 AM -
external compound mitre on picture rail into a dormer
By dirtydeeds in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 4Last Post: 25th July 2007, 07:42 AM
Bookmarks