Page 1 of 4 1234 LastLast
Results 1 to 15 of 46
  1. #1
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default Belic tools & machinery pty ltd

    Belic Tools & Machinery Pty Ltd
    Head Office 2/ 256-258 Frankston-Dandenong Rd Dandenong Victoria 3175
    has anyone had dealings with this Melbourne company
    reason i ask is that on the 20/11/09 i paid for a bandsaw plus postage to queensland,i received an email on the 24th telling me it was posted , after waiting till the 7th of december i started to get a bit anxious so i rang them only to be told that they dont know why but it hasnt gone yet,it was still on the floor waiting to go,and that it will be posted , would you be happy with that sort of service ?,or am i over reacting , i have sent them emails ,rang melbourne 4 times,no replies whatsoever, i sure aint happy ,what would you do?, any suggestions.........bob

  2. #2
    Join Date
    Feb 2007
    Location
    humpty doo N.T
    Age
    48
    Posts
    0

    Default

    Certainly not the best service.

    I do believe people are susceptible to make mistakes and some forgiveness/understanding should be given but they should also try to make it up to you I think the least they should do is pay for the freight but I see you have already paid for that
    I would ask them for some sort of good will to prevent you informing the woodwork of there poor customer service community just be careful you only tell the facts

    I had a similar but different thing happen recently when I had booked some concreter's to do some work but did not turn up and offered no form of retribution so now they do not get my recommendation and I know that has cost them potential $20,000 of work that I could have recommended them for. who is the goose

    Good luck
    Cheers Rum Pig

    It is easier to ask for forgiveness than permission.

  3. #3
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    Quote Originally Posted by robyn2839 View Post
    Belic Tools & Machinery Pty Ltd
    Head Office 2/ 256-258 Frankston-Dandenong Rd Dandenong Victoria 3175
    has anyone had dealings with this Melbourne company
    Bob,


    I've had dealings with them through their Blackburn South store, albeit about 15 years ago. I bought my original compressor and nail gun from them as well as my first lathe.

    Never had any problems with them but that was personal shopping. As I said they have been around for at least 15 years so they are not a fly by night operator.

    I suggest you talk to them. Hope this helps.


    Peter.

  4. #4
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Question

    You are right to be concerned Bob> it should arrive in the next day or so. If not you might try Consumer affairs.

  5. #5
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default

    starting to look that way, serves me right for buying so far away but they seemed to be reputable and a big company,wont even answer emails, what a way to run a business ..........bob

  6. #6
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default

    just spoke to them again and was told it was posted on Tuesday, and would take 5 days to get here
    will be waiting to see what happens next week, not bad considering i paid for it almost three weeks ago, and then i received an email to say it was posted two weeks ago, will never use these people again they just wont and don't answer emails when i enquire i have to ring them ,and get Bs anyway. will keep you updated when and if it comes next week., cant wait to fill out their feedback form........bob

  7. #7
    Join Date
    Aug 2008
    Location
    Pensacola Florida
    Age
    78
    Posts
    0

    Default

    Hope all works out well in the end Bob. It shouldn't be a chore dealing with a company, but unfortunately it does turn out that way at times.
    Cheers,
    Ed

    Do something that is stupid and fun today, then run like hell !!!

  8. #8
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default

    saw arrived today , check this out, imagine how happy i am now, bloody joke.....bob

  9. #9
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    53
    Posts
    299

    Default

    Is that meant to be a brand new bit of gear?
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  10. #10
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default

    yes brand new from them just unpacked it

  11. #11
    Join Date
    Feb 2007
    Location
    humpty doo N.T
    Age
    48
    Posts
    0

    Default

    I do not know what to say except I feel for you

    I hope you give them hell that is no way acceptable
    Cheers Rum Pig

    It is easier to ask for forgiveness than permission.

  12. #12
    Join Date
    Oct 2006
    Location
    Armidale NSW
    Age
    53
    Posts
    299

    Default

    That's very poor.
    Decide how you want this resolved (i.e. what you will be happy with) and then go get 'em.
    Cheers.

    Vernon.
    __________________________________________________
    Bite off more than you can chew and then chew like crazy.

  13. #13
    Join Date
    Sep 2008
    Location
    Melbourne
    Posts
    19

    Default

    Robyn,

    I work near them, if you need someone to help with face to face (like to inspect before shipping a replacement) give me a PM.

  14. #14
    Join Date
    Jul 2007
    Location
    Nambour queensland
    Age
    69
    Posts
    0

    Default

    am going to go for a refund now , i have had enough of this, what a nightmare.i can do without the grief....... thanks for that .bob

  15. #15
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Angry


Similar Threads

  1. Hand Tools and Machinery Split
    By dazzler in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 9
    Last Post: 15th May 2006, 11:40 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •