swansdown mop

[schaf]

Would you cause a problem to the finish of your work if you use the same swansdown mop for both EEE and Traditional wax.
Regards Terry

[ubeaut]

Nup, I do it all the time.

You may need to buff the surface by hand with a clean soft rag when you are finished using the mop. This is to remove the light wax haze that sometimes appears after buffing. You don't have to rub hard or long, just a light wipe over should do nicely.

Of course you can always buy a second one and use one for EEE and one for Trad, puts a smile on my face and/or the distributor who sold it to you.

Cheers - Neil