![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: new sliding glass door question
-
19th May 2009, 10:50 PM #1
new sliding glass door question
I want to remove an old picture window and install a sliding glass door. The door will be about 3-4 foot off the ground and lead to a soon to be built deck. The outside of my house is covered in red brick and it has a gap behind the brick of about 3/4 inch. I will have to remove a section of red brick that is under the window down to floor level. When I insall the new construction sliding glass door I believe that gap will be visible along with the top layer of red brick when looking at the outside. How do I finish/seal this area?
Read and reply to the full thread at RenovateForum.com....
Similar Threads
-
replacing roller door with sliding glass door
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 1st February 2009, 11:20 AM -
Flat track sliding door question
By ubeaut in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 16th November 2008, 07:21 AM -
How to remove Metal Door Frame (and put up glass shower door)
By makka619 in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 7Last Post: 11th October 2006, 02:41 PM