Page 1 of 3 123 LastLast
Results 1 to 15 of 35
  1. #1
    Join Date
    Dec 2004
    Location
    Up North
    Posts
    145

    Unhappy How NOT to use a table saw

    I was cutting a piece of HDPE, at the end of the cut the saw kicked back, the pushstick slipped and my thumb went right into the sawblade
    It cut right through the top of the thumb
    CutRightThroughThumb.jpg
    Split some of the bone, then deflected and cut a large part of skin of, right through to the muscle.
    quite a bit of nerve damage there.
    SkinGoneRightThrughToMuscle.jpg OUCH.jpg
    Freak accident where the pushstick just did not work.
    Every day is better than yesterday

    Cheers
    SAISAY

  2. #2
    Join Date
    Aug 2004
    Location
    Sunbury, Victoria, Au.
    Posts
    0

    Default

    Uk! Ugly!
    Russell (aka Mulgabill)
    "It is as it is"

  3. #3
    Join Date
    Apr 2011
    Location
    Dandenong, Vic
    Posts
    0

    Default

    Reminds me to let the saw do most of the work.

    Don't push too hard, if its getting hard its time to sharpen or change the blade.

    Hope it all heals ok.

  4. #4
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    Bad day in the office, but consider yourself lucky because you didn't not lose a finger.

    What brand is it? You can suit them for not having the flesh-detection technology.

    I just read an article on the Boston Globe's website about a guy in Malden, Mass., who was awarded $1.5 million in damages in a suit against One World Technologies, Inc., makers of Ryobi tools.

    According to the complaint filed in 2006, Carlos Osorio suffered serious finger injuries using a tablesaw while cutting some oak flooring. The suit alleged that One World was negligent because its saws lack "flesh-detection technology," which the plaintiffs claim would have prevented Osorio's injuries. The device, invented by Steve Gass and manufactured by SawStop, stops a sawblade in an instant when it makes contact with skin. The safety feature was pitched to major saw manufacturers by Gass, but according to SawStop, licensing negotiations broke down and no agreements were reached. In the end, Gass and his colleagues, David Fanning and David Fulmer, launched the SawStop line of tablesaws on their own.

    According to the story, this case is one of more than 50 suits pending throughout the U.S. against tablesaw manufacturers for failure to include the flesh-detection technology in their products.
    Visit my website at www.myFineWoodWork.com

  5. #5
    Join Date
    Feb 2009
    Location
    moonbi nsw Aus
    Age
    70
    Posts
    228

    Default

    Most "accidents", I reckon are down to operator error. (But in this case, just bad luck) You could even look at car "accidents" how many of those are driver error?(Texting while on the move etc)
    The worst part of any injury in the workshop is having to retell the story to the Medicos and assuring them that all the safety mechanisms were in place and it was...an accident. I am sure they reckon that it was all our fault for doing something silly.
    When I was a first year apprentice Carpenter the tradesman I was working with told me that you weren't a "true tradesman" until you cut a finger off. Iwas 15 at the time and still remember I wanted to show ALL my fingers to my grandkids.

    That finger looks sore and probably will be for a while. A little brush like that does tend to sharpen our wits a little. I hope it heals fast and you will be able to finish the job you were working on at the time
    Just do it!

    Kind regards Rod

  6. #6
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Ouch, bugger, damn and blast it ! That would have to hurt. Hope it all heals up leaving just a scar (for later storytelling purposes..), and you don't lose any feeling in the affected bits.

    This sounds like just one of those things that can happen to anyone (except wealthy SawStop owners?), but I'm always very careful using pushsticks on the tablesaw. I just got one of those Grripper things too, which provides excellent control.

    I always make my homemade pushsticks to hold the wood down and keep my hand as far above the blade as possible. Also, the tab at the back holding the timber is angled so that the pushstick is forcing the timber into the fence AND the line of force from my hand is away from the blade if I slip. I've attached a silly little drawing in case anyone else finds this useful.
    Attached Images Attached Images

  7. #7
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    64
    Posts
    0

    Default

    These are the accidents that scare me.

    If I hurt myself by doing something stupid, careless or unsafe, then it's a case of sucking it up and moving on as best I can. (Grumbling & whining all the while.)

    But when it's basically just because "s**t happens" ...?

    [shudder]
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  8. #8
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    Can you improve your luck by having a better push stick and a overhead blade guard in place?
    Visit my website at www.myFineWoodWork.com

  9. #9
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    Exactly - you do something the way you've done it hundreds of times before with no problems, then one day the machine decides to bite

    For me the machine most likely to hurt me is still my lathe. I'm not confident enough, and prodding at the wood rather tentatively with my assorted tools. Most turning sessions end with me retreating to the house badly frightened, with tail between legs . The skew chisel is my sworn enemy !

  10. #10
    Join Date
    Aug 2010
    Location
    ACT
    Age
    85
    Posts
    546

    Default

    Hi SAISAY,
    A speedy recovery and thanks for the graphic warning/reminder and not keeping it secret.
    Regards
    Last edited by A Duke; 1st May 2013 at 04:11 PM. Reason: Stop the spell checker from embarrassing me.
    Hugh

    Enough is enough, more than enough is too much.

  11. #11
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Sorry to hear about this - you were lucky it was not worse.

    A couple of questions would be
    1) How long was the push stick?

    2) What sort of blade were you using? HDPE should be cut with a negative rake tooth blade. A positive rake blade it is liable to cut in fits and spurts and can even grab the workpiece and pull it very quickly into itself. The softer the material the more likely it is to happend and the sort of injury you sustained is a likely outcome.

  12. #12
    Join Date
    Dec 2004
    Location
    Up North
    Posts
    145

    Default

    Quote Originally Posted by BobL View Post
    Sorry to hear about this - you were lucky it was not worse.

    A couple of questions would be
    1) How long was the push stick?

    2) What sort of blade were you using? HDPE should be cut with a negative rake tooth blade. A positive rake blade it is liable to cut in fits and spurts and can even grab the workpiece and pull it very quickly into itself. The softer the material the more likely it is to happend and the sort of injury you sustained is a likely outcome.
    1) The pushstick was about 400mm, a commercial one
    2) Aluminium blade, especially bought for perspex and HDPE.
    Over head guard is always in place as is the splitter.
    Just a stupid freak accident, I have done this multiple times before.
    Everything went so fast that I am not 100% sure how it happened.
    Every day is better than yesterday

    Cheers
    SAISAY

  13. #13
    Join Date
    Mar 2013
    Location
    Tasmania
    Posts
    100

    Default

    I think you speak with forked thumb Saisay! Not pretty at all but glad to see that you didn`t lose the top of your thumb & trust you`ll regain all functionality. gordon

  14. #14
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Quote Originally Posted by SAISAY View Post
    . . . . Everything went so fast that I am not 100% sure how it happened.
    that's often the case, but if it comes back to you later and you are up for it then it would be helpful to let us know. A similar thing happened to me when I was in a head on car accident I was in. I wrote down what I think happened within the hour but the next day I went back and reread and replayed the whole thing in my head and only then realized the driver had stepped out of the car holding his mobile. This lined up with his body language of his head being down immediately before the accident - he was using his mobile.

    Sorry to keep pestering you with questions but do you recall if the push stick was being pushed directly in line with the blade?

  15. #15
    Join Date
    Nov 2006
    Location
    Rockhampton
    Age
    63
    Posts
    0

    Default

    I don't like push sticks that much, I prefer to use a block something like Mr Brush is indicating, that way the matl is held down, pushed and my hand is well out of the way.
    Hope the injury repairs OK

    Pete

Similar Threads

  1. What's The Difference Between A Pool Table & Snooker Table & Billiard Table
    By echnidna in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 47
    Last Post: 26th January 2007, 05:09 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •