Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4

Thread: Lighting Newbie

  1. #1
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    2

    Default Lighting Newbie

    Hello Everyone,

    I am new to this forum and want to understand some lighting basics.

    I am in the process of buying a house and renovating it and need the following advice.

    What is the difference between down lights and spot lights?

    Do you normally get the light as a set, the actual holder, transformer, dimmer and the globe?

    What type of globe is better, florocent or halogen.

    If all this basics have been discussed before, then would appreciate if someone could guide me to the link

    Thanks

  2. #2
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Hi there First

    I think you may need to visit a lighting shop to get the best picture. Try having a look at http://www.beaconlighting.com.au/ that will give you an idea of what's what.

  3. #3
    Join Date
    Dec 2005
    Location
    geelong
    Posts
    59

    Default

    gday. Spotlights are more of a one dirrectional light to highlight something like a painting etc. also spotlights are those big ugly things hangin off your wall outside. Downlights are as the name suggests lights that omit light down and have a certain width of light spread. if using low voltage ones you will get them as a package usually with the light fitting, transformer and globe. You will have to get a dimmer seperate. The differance between halagen and floresent... fluro gives much more even light with less shadows. softer light compared with halegen. Fluro light is great for places you really need to see such as kitchen, workshop etc but pretty ugly in lounge room. Hope this helps.

  4. #4
    Join Date
    Apr 2007
    Location
    Gold Coast, Australia
    Age
    51
    Posts
    12

    Default Info on lights

    Hi

    I found some deatils in another forum with performance of lights by an extremely clever guy.

    http://www.cbusforums.com/forums/showthread.php?t=3660

    Just to confuse things even more. I have recently installed some LED downlights in a commercial building.......very very poor light spread when comparing to Halogen downlights. And the cost for the light fitting was aprox $80 each plus transformer.

    Manufacturer claims that you will save the initial outlay over the life cycle of the light (aprox good for 50,000 hrs???). Still hurts the hip pocket to start with. There are so many variables these days.........just speak with your nearest lighting specialist and they will lead you in the right direction.

    Good luck
    Please always use a licensed Electrician, any advice given is for your benefit in reagrds to SAFETY. The worst thing about electricity is you cant see it......and it bloody hurts!!!

Similar Threads

  1. What lighting for new shed???
    By bloggs1968 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 8
    Last Post: 16th June 2007, 06:47 PM
  2. Lighting
    By Loki429 in forum LIGHTING
    Replies: 1
    Last Post: 12th January 2007, 01:35 AM
  3. 12V lighting and roof insulation
    By hislopal in forum LIGHTING
    Replies: 2
    Last Post: 26th July 2006, 11:29 PM
  4. Lighting script.
    By Cliff Rogers in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 2
    Last Post: 22nd February 2006, 08:43 AM
  5. Exterior Low Voltage Lighting
    By MikeK in forum LIGHTING
    Replies: 6
    Last Post: 18th June 2005, 09:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •