![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Old newbie
-
14th December 2008, 05:25 PM #1
New Member
- Join Date
- Dec 2008
- Location
- Perth
- Posts
- 2
Old newbie
G'day all,
Just found this forum and thought I would give it a try.
56 year old living in Perth, having lived in Hobart for many years.
Been working with wood (and bricks,cement etc) for many years as a DIY home renovator.
Have built many things from built in wardrobes to a complete study and small pieces of furniture using everything from pine to Jarrah and MDF.
My current project is renovating our ensuite bathroom and I have built the sink cabinet, which leads me to a question someone out there may be able to help me with.
When I did the main bathroom I had the bench top made with moulded laminex top (curved front).
I would like to try doing this myself for the new one. Does anyone have any experience and advice or should I get this one made too?
Any help would be appreciated.
Look forward to participating in this forum in the future.
Many thanks
Clive
-
14th December 2008, 07:11 PM #2
G'day Clive, I can't help with your question but I can welcome you to the board, and before others say I will suggest you post many pictures.
soth
-
15th December 2008, 01:43 PM #3
Welcome Clive....hope you find some answers to the questions.
Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
17th December 2008, 11:04 AM #4
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 355
G'day Clive and welcome.
I think you'll find to bullnose laminate it is done with heat being applied by a machine.