![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: 1/4 scale wardrobe
-
5th January 2014, 11:41 AM #1
New Member
- Join Date
- Jan 2014
- Location
- Kurri Kurri
- Posts
- 4
1/4 scale wardrobe
Here's a wardrobe i made a while back. 1/4 scale (not 1/25th scale as some think, but full size divided by 4). Made from pine. The door and drawer latches were made from brass shelf supports and brass wire. The hinges and door latches are also brass. Thanks for looking. Daryl
-
7th January 2014, 04:30 PM #2
Ten out of Ten, Daryl..
That's a ''Ten out of Ten'' project, Daryl..very impressive..
Can hardly wait for the rest of the houses furniture....
Cheers, crowie
-
7th January 2014, 05:38 PM #3
-
7th January 2014, 06:42 PM #4
Like your router table.
RegardsHugh
Enough is enough, more than enough is too much.
-
8th January 2014, 09:17 PM #5
New Member
- Join Date
- Jan 2014
- Location
- Kurri Kurri
- Posts
- 4
Thanks guys. Sorry, the drawers aren't dovetailed. I clamped the router in the workmate like that to mill the flutes in the drawer fronts. It was easier to do it this way than on the table.
Here's a pic of the doll that it was made for. Daryl
-
9th January 2014, 09:36 AM #6
Very nicely done. It looks really authentic with the doll in place.
Looking forward to some more of your work.Dallas
-
9th January 2014, 11:04 AM #7