![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
7th September 2006, 05:36 PM #1
Member
- Join Date
- Jul 2006
- Location
- syd
- Posts
- 59
Sanding back some high spots - Self levelling cement
Hi there - I poured this the other day but I was short by 1 bag. So it started setting before I got the other bag in.
When I added the rest it has set higher in one area by abut 3mm. Could I sand the build up slightly to get it relatively level.
I am going to be putting down floating floors.
I there any quick way besides concrete grinding? Id on't have to take too much off..it is reasonably ok.
Thanks
-
7th September 2006, 05:49 PM #2
Member
- Join Date
- Jul 2006
- Location
- syd
- Posts
- 59
Could I use an angle grinder on it to just knock off some of the higher areas?
Thanks
Similar Threads
-
Self levelling cement - different brands etc
By powerbuff in forum CONCRETINGReplies: 9Last Post: 22nd August 2006, 10:07 AM -
Sanding back between coats
By aabb in forum FINISHINGReplies: 5Last Post: 8th August 2005, 09:39 PM