Results 1 to 2 of 2
Thread: maloof mix
-
20th November 2010, 12:09 AM #1
GOLD MEMBER
- Join Date
- Nov 2006
- Location
- Rockhampton
- Age
- 63
- Posts
- 0
maloof mix
I should be able to put a maloof mix over the top of a straight raw linseed oil finish shouldn't I ???
Any thoughts or opinions?
Pete
-
20th November 2010, 05:14 AM #2
Moderate Moderater
- Join Date
- Feb 2006
- Location
- Lindfield N.S.W.
- Age
- 63
- Posts
- 1,644
The only concern I have is that the raw linseed won't properly oxidise (unless it has before you put the MM over the top) and so may remain wet under the MM. It shouldn't be a problem if the oil is still wet enough to combine on the surface with the MM but I would try it out on a scrap first if you can
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
Reply With Quote
Bookmarks