Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Dickson Toolpost Brochure
-
29th November 2011, 11:22 AM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,641
Dickson Toolpost Brochure
Philip " Metalman" generously provided me with an original which I have scanned for those that may be interested.
I use a Swiss BONI toolpost on my Hercus. It would be interesting to find out if any of the cheap Chinese Dickson copy toolholders fit. I will draw one of the original holders and post the drawing here. Maybe someone could make a comparison for me.
Bob.
-
29th November 2011, 11:33 AM #2.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,641
I had this sketch in the notebook I took away with me in hope that I would find something in a Swiss flea market. Talk about optimism.
-
29th November 2011, 02:01 PM #3
Hi Bob,
Thanks for that, I'll measure up the ones I've got. And post the results here.
I remember reading somewhere about lack of interchangeability for toolholders, but I can't remember where I read it. I think every maker had their own variant, probably deliberately different so that you are forced to buy their toolholders.
Regards
Ray