Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2005
    Location
    Western Australia
    Posts
    190

    Default How to estimate a deck?

    We are considering putting a deck onto the second story of our two-story house. Is there any way of guessimating the cost? I know that renovations will cost $1500-$2000 per square metre, is there any equivalent for decking?

    I am pretty handy with wood, and have done a ground-level deck before, so what I was thinking was getting a retired builder in for some cash to help me put up the posts, barers and joists, then I will nail the decking myself.

  2. #2
    Join Date
    Jan 2006
    Location
    Melbourne
    Posts
    722

    Default

    Hi there, you need to come up with your design, then once you know the timbers sizes required etc. you can ring a supplier or look at tradeconnect.com.au to get a basic cost. Then add however much you think you can hire a retired builder for.

    I'm not sure there would be an equivalent price per Sqm for decks because it isn't such a large job as a house and not as easily averaged. Also, if it is not at ground level then there maybe additional structural requirements that bump up the price.

  3. #3
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Hi Spelunx

    I work for a company that does home improvements and we do decks using steel bearers and joists with various types of decking materials and with hardwood decking we charge $409.00 M2 for the materials for up to a metre high and $86.00/m per pier over 1 metre. Installation is from 20% to 30% on top depending on how far from our sales centre.

    We are considered to be expensive.

    Hope this will give you an idea of what to expect.

    Sorry but we don't do work in the west.

  4. #4
    Join Date
    Feb 2006
    Location
    Brunswick West
    Posts
    172

    Default

    I have been told by a few builders now that a good estimate is simply $250-$260 per sq metre.

    Over $400 is damn expensive but I guess it uses steel.

    Cobber

  5. #5
    Join Date
    Dec 2005
    Location
    Western Australia
    Posts
    190

    Default

    Cheers guys,

    I only wanted it rough because at this stage it is only a plan.

    I am hoping to get a lot of the timber from local mills, as I live in the South West of WA, and have a few handy.

    Any other tips people pass along to save money? I am planning to do a lot of the work myself, except from the basic construction.

  6. #6
    Join Date
    Feb 2004
    Location
    brissy
    Age
    55
    Posts
    29

    Default

    baz, how do you fix the decking to the steel joists?

  7. #7
    Join Date
    Oct 2003
    Location
    Kentucky NSW near Tamworth, Australia
    Age
    86
    Posts
    1,067

    Default

    Quote Originally Posted by russ34 View Post
    baz, how do you fix the decking to the steel joists?
    Our builders fix the decking down with Teks. Two to each board. Because of the way our steel joist are made they are fixing into a double thickness of steel. The joists are actually a box section.

    We have a company near here who manufactures steel house frames and he has been fixing out his houses with an air nailer for over 20 years. Fixing all manner of things. e.g. Hardiplank, hardwood flooring, pyneboard flooring and architraves etc. and has never had any thing fail yet.

    When he fixes decking he leaves the nails proud and hand punches the nails home. He did a test once to see if he could pull the nails out and the boards snapped in half at the nail points.

Similar Threads

  1. (Another) Low clearance deck in perth. [Long...]
    By mickfromperth in forum DECKING
    Replies: 2
    Last Post: 15th November 2006, 07:50 PM
  2. question about deck flooring
    By biotechy2k in forum FLOORING
    Replies: 7
    Last Post: 17th October 2005, 08:47 AM
  3. Deck refinishing
    By jimj in forum FINISHING
    Replies: 2
    Last Post: 20th April 2005, 07:33 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •