Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2015
    Location
    Australia, Sydney
    Posts
    0

    Default G'Day from Sydney

    G'day all, Happy New Year,

    By way of introduction I expect I am among a certain type of aspiring woodworker who must introduce themselves here regularly enough from time to time. My ambition far exceeds both my skill and tools but there is rather more determination and patience than I had in my younger days so I am going to go right ahead and get involved in the discussion around my interest without fear of failure - because to me the only failure in this project would be to not make any attempt to finally go ahead.

    I have always had a fascination for watches and clocks. My grandfather on my father's side was a genuine man of science and engineering - a senior Navy officer schooled in the oldest and proudest traditions of navigation, astronomy and horology.

    He had steadier hands than I and worked on pocket watches some of which I have inherited.

    My grandfather on my mother's side was a marvelous craftsman in wood and metal doing astonishing inlays, dovetails and complicated secret boxes as well as the all important billy carts, rocking horses and block sets that fit into a box like a cnc machined puzzle.

    Anyway, I started to learn things from both these men but ended up with a life more toward computing and the academic.

    For some time I have however wanted to make a clock from wood and reading the story of Harrison's navigational H series clocks in Longitude was an inspiration and I set about finding plans and, having a basic understanding of the movements and mechanics of gears and clockwork I can see that a simple wood gear clock is far from impossible in this age of machinery available to the home handyman.

    I have a very well setup workspace and quite a lot of woodworking tools but never developed any fine skills - probably a sawhorse was the most complicated thing I have made beyond a gate I built after deriving the angles with trig - something that delighted me more than I can readily convey - the fact that it functioned and still does perfectly to this day is a source of still more delight.

    Anyway I want to get the basic minimum tools required to cut the gears for a simple clock and then take the time and have the patience to make them well enough for them to work.

    I have also experience in building and setting up model helicopters where the gear train and backlash, mesh and shimming of everything along with dialing in to thousandth's is required for a good machine so in time I should be able to develop the skills.

    So, there it is. I will now go about reading and researching but I guess I need to start with some basic tools for this kind of job - I have a very good drill press but no scroll saw... So that may well be where I start.

    Thanks for the community resource here guys and thanks in advance for any and all feedback or advice.

    Will

  2. #2
    Join Date
    May 2013
    Location
    Rockhampton QLD
    Age
    69
    Posts
    1,570

    Default

    Welcome to the forum Will.

  3. #3
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Welcome to the forum. That's a good introduction from knowing your grandfathers.

  4. #4
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    2,576

    Default

    G'Day & Welcome to a top forum "Will".
    There are a heap of members in & around the Sydney and surrounding areas.......
    You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
    Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
    Enjoy the forum.
    Enjoy your woodwork....
    Cheers crowie

    PS - Watch out for a Sydney area "get together" at Katoomba....good to met and chat....
    Go Navy...

  5. #5
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    1,889

    Default

    Welcome to a top forum

Similar Threads

  1. G’day from Sydney
    By HeadScratcher in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 1st February 2012, 07:59 AM
  2. Hi from Sydney
    By cor55 in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 5
    Last Post: 1st November 2011, 01:06 PM
  3. New from SW-Sydney.
    By Kwaka_Chris in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 7
    Last Post: 14th November 2010, 05:34 PM
  4. G'day from Sydney
    By Purfler in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 8
    Last Post: 18th March 2010, 08:49 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •