![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 9 of 9
Thread: warranted superior hand saws.
-
11th April 2009, 11:36 PM #1
Deceased
- Join Date
- Aug 2008
- Location
- Bundaberg Queensland.
- Age
- 76
- Posts
- 267
warranted superior hand saws.
A week ago i bought a hand saw which i thought was an old Disston it was rusty and the madelion had eagle in the center,but i've since found it is a Warranted Superior saw that was made by Disston .i'v looked up the Disstonion site and found the madelion is different in so far as the madelion on my saw has a ring of dots around the eagle and the one on the Disstonion site dosen't .Question :::can anyone tell me anymore about these Warranted Superior medelion's ,or point me to another site with more information about Disston saws, madelions ect.Lloyd.
-
12th April 2009, 09:49 AM #2
Hi Loyd,
Disston wasn't the only maker who used "warranted superior" medallions, there are a number of others with eagles, Simmonds for example used an eagle on their warranted superior medallions, and in the UK a "warranted superior" medallion with a coat of arms was used by any number of makers.
I would be interested in seeing a photo of the one you have.
Regards
Ray
-
14th April 2009, 12:55 AM #3
Intermediate Member
- Join Date
- Jul 2006
- Location
- Melbourne (Upwey)
- Posts
- 38
A lot of the saws made by Disston, were not finished to as high a standard as their regular saws, to be labelled as Warrented Superior. I have a couple, alongside numerous Disstons, and don't find much difference in quality, just finish.
-
9th November 2016, 10:36 PM #4
New Member
- Join Date
- Nov 2016
- Location
- Perth australia
- Age
- 55
- Posts
- 8
Hi can anyone help ive bought a saw with a warranted superior emblem with an eagle on it and im trying to find where and when it may have been made. It has slotted screws top and bottom with the eagle emblem in the middle. Any help would be greatly appreciated.
-
10th November 2016, 02:47 AM #5
This link may help... a little. Covers many medallions.
Saw Medallion Reference Guide - by summerfi @ LumberJocks.com ~ woodworking community
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
10th November 2016, 05:04 AM #6
SENIOR MEMBER
- Join Date
- Oct 2009
- Location
- South Africa
- Posts
- 659
Posting a picture or two would the experts to help too. One of the whole saw, and a close up of the medallion. Also the etch if it's visible.
for the record, I'm not one of the experts
-
10th November 2016, 07:39 AM #7
I'm not an expert either but like looking at other people's acquisitions
so piccies pleaseregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
10th November 2016, 10:43 AM #8
New Member
- Join Date
- Nov 2016
- Location
- Perth australia
- Age
- 55
- Posts
- 8
Thanks guys ill put some pics up after work
-
10th November 2016, 09:18 PM #9
New Member
- Join Date
- Nov 2016
- Location
- Perth australia
- Age
- 55
- Posts
- 8