![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
-
10th January 2014, 09:36 AM #1
New Member
- Join Date
- Jan 2014
- Location
- Melbourne, VIC
- Posts
- 1
Another Melbourne small-shed beginner
Hi I'm Adam from the Melbourne suburbs. My shed is a converted two-car space, at the moment the only thing set up is a Triton table saw. The TRA001 router is in a drawer - haven't used it much since it nearly took my thumb off 4 years ago cutting a slot in some HDPE. But the thumb is better and I'm about to buy a proper table, fence etc. and begin using it again. Immediate plans are for a finger-jointed tool cabinet for the wall to hold all the nicer hand tools, a wall of storage for the other stuff and then trolleys for the drill press and vacuum/dust collection. Then I'm hoping to build guitars.
-
10th January 2014, 10:24 AM #2
Senior Member
- Join Date
- Apr 2011
- Location
- Pakenham, Victoria
- Age
- 53
- Posts
- 10
Welcome to the Forum. Nice to have you here
-
10th January 2014, 04:31 PM #3
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum.
-
10th January 2014, 05:28 PM #4
G'Day & Welcome to a top forum "Adam".
There are a heap of members in Melbourne and across Victoria.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you show off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork and the new purchases; keep safe.
Cheers crowie
-
10th January 2014, 09:57 PM #5
Gidday & welcome aboard Adam, may your journey with us be a pleasant one.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
11th January 2014, 12:58 AM #6
Adam,
Welcome to the forums, Sounds like you have heaps of projects to crack on with so the best of luck and if you get stuck there are plenty of friendly people on here that are normally happy enough to help out.
Good Luck with it all
Cheers
Tony
-
11th January 2014, 06:40 AM #7
Welcome to the forum. I hope your continual journey does not involve any further spilling of blood.
-
11th January 2014, 07:57 AM #8
welcome aboard
Similar Threads
-
Beginner from Melbourne
By Binary01 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 16Last Post: 20th November 2013, 04:49 PM