Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default fixing old bentwood chairs

    Has anyone got any tips on fixing these lovely old beasts.
    Their main old age probs seem to be the bentwood "springing" on the bent bits and the legs getting the wobbles.(sounds like me)
    Ive had a few of these to fix and never with much success
    It seems that the legs twist out of true and wont go back where there suposed to.
    Ive tried wetting up the steamed wood and clamping it back but it wont stay put.
    Any sugestions?

    Astrid

  2. #2
    Join Date
    Jul 2006
    Location
    Durong Qld
    Age
    63
    Posts
    0

    Default

    Probably have to make a mold and resteam them. clamp in the mold for a few days and then use.

    Donna

  3. #3
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    Thanks Donna,

    How do you go about steaming timber without special equiptment.

    Astrid

  4. #4
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    do search this forum for steam bending

  5. #5
    Calm's Avatar
    Calm is offline Stubby Owner and proud of it. Now coming back to Earth.:D
    Join Date
    May 2006
    Location
    Niddrie, Victoria
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by astrid View Post
    Thanks Donna,

    How do you go about steaming timber without special equiptment.

    Astrid
    Put them in the bathroom while a teenage daughter has a shower (normally 1/2 hour) should do the trick

    Just had a thought With 4 daughters i could go into business
    regards

    David


    "Tell him he's dreamin."
    "How's the serenity" (from "The Castle")

  6. #6
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    Thanks, calm

    I'll try that.
    Should i suspend the chair over the showerers head for max effect?

    Astrid

  7. #7
    Calm's Avatar
    Calm is offline Stubby Owner and proud of it. Now coming back to Earth.:D
    Join Date
    May 2006
    Location
    Niddrie, Victoria
    Age
    68
    Posts
    0

    Default

    Quote Originally Posted by astrid View Post
    Thanks, calm

    I'll try that.
    Should i suspend the chair over the showerers head for max effect?

    Astrid
    Shouldnt matter you cant see in there for at least another 1/2 hour anyway
    regards

    David


    "Tell him he's dreamin."
    "How's the serenity" (from "The Castle")

  8. #8
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default



    astrid

  9. #9
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    cant find anything on the forum about how to steam bend in the comfort and safty of your own home.
    I'll ask on the gen ww forum

    thanks
    Astrid

  10. #10
    Join Date
    Jun 2006
    Location
    Macedon, Victoria.
    Age
    65
    Posts
    31

    Default

    I'm no help... the only ones I've worked on were genuinely old, and the shape was as good as the day they were made, only the (massive) screw holding each leg on required tightening both under the seat, and on the stay-ring a couple of inches below. Sorry.
    Bill
    Chipslinger

  11. #11
    Join Date
    Dec 2007
    Location
    Gold Coast
    Posts
    0

    Default

    My daughter bought six of them. All rickety, seats needed replacing, and the bentwood had sprung.

    I di not know how bad yours are, but I used some boatbuilders polurethane Glule (Vise) I used a small brush and put the glue between the leaves and put about four small clamps on the curve of the chair.

    The beauty, and the beast of Vise compared to the Selly's one is that it foams twice as much and forces itself into all the small grooves, holes, spaces, which is why the boaties like it, because it waterproofs a lamination or joint.

    After it dried, I had to scrape it off, and slightly reshape the round form of the bentwood.

    To finish it off where some of the lamination at the end was damaged and could not be reshapen I just used some woodmate filler in the small arear that needed it. the sposor of this site may have something better because I fixed these chairs about six months ago and I did not kinow of this forum then or the U-beaut finishers.

    I have seen some of the results received by some members so they can tell you about that.

    But i think you have two issues. I gave you an idea for the first, addressing the laminations, the finishing is another story, the experts here may be able to help.


    PS> The clamps I used were the Galvanised worm driven hose clamps. The gal ones are the best because they are cheaper then the Stainless ones, more malleable and can be roughly bent into the shape of the bend in the chair.

    I used the same principle years ago to mend hockey sticks that had given way in the shaft and this was the way we re glued the round handle so it was glued evenly all round.

  12. #12
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    Thank you Star,
    I'll try your method for the sprung timber,
    Anyone tell me how to reshape steamed wood at home?

    Astrid

  13. #13
    Join Date
    Sep 2006
    Location
    Taree Mid North Coast
    Age
    81
    Posts
    0

    Default

    G'Day Astrid

    DIY steaming mentioned in this site http://www.ehow.com/how_2081425_repa...ood-chair.html also a lot of other interesting reading in the main.

    Cheers
    Bernie

  14. #14
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    Thanks BernieP,
    That is exactly what I was after,
    Have bookmarked

    Astrid

  15. #15
    Join Date
    Dec 2007
    Location
    Gold Coast
    Posts
    0

    Default

    Buggar me. I just read that post and Part of the suggestion was to use Automotive hose clamps and brush the the splines with a small artist brush.


    For me a newbie I am feeling ok that I contributed something to a post that I used to do forty years ago to repair hockey sticks that cost me a week's pay, if I had to buy a new one.

    The fact that I used that knowledge to repair all my daughter's chairs gave me immense satisfaction but to see somebody has pirated my only source of fame and had the audacity to put it to print under their name has me very dissapointed.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •