Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
9th June 2005, 06:48 AM #1
New Member
- Join Date
- Jun 2005
- Location
- Dallas, TX
- Posts
- 1
Finishing Hardwood floors with a spray gun?
Has anyone ever finished hardwood floors with a spray gun? Most of the information I have read suggests the use of lamb's wool or some other type of mop for the finish application. Any help on this would be much appreciated. Thanks.
-
9th June 2005, 09:45 AM #2
The typo kign
- Join Date
- Aug 2003
- Location
- Melbourne - Outer East Foothills
- Posts
- 4,356
I can't see why you'd use a gun. Mess, overspray, thinned down lacquer for the gun - I would have thought all these are contraty to what you want on a floor. And by the time you masked off the walls you could have mopped on a coat.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
9th June 2005, 09:53 AM #3
Deceased
- Join Date
- May 2005
- Age
- 72
- Posts
- 364
Spot on Gumby. The other consideration with a floor is the depth of the coating needed for resilience - i.e. the thicker the better. You'd be there an awfully long time doing that with a spray gun...
-
11th June 2005, 02:28 PM #4
Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 0
I've done it with a good quality airless gun; didn't need to thin the stuff and it was quick but the cover wasn't as good as a lambswool mop, brush or roller provides. I wouldn't use it again.
Cheers, Ern
-
11th June 2005, 04:15 PM #5
The True Believer
- Join Date
- Jun 2004
- Location
- Bunbury W.A.
- Age
- 56
- Posts
- 398
I reckon that you cant go wrong with a MOHAIR roller.
Quick, easy and no fuss.
Steveif you always do as you have always done, you will always get what you have always got
Reply With Quote
