Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2010
    Location
    brisbane
    Posts
    19

    Default Finishing silky oak

    I have an old silky oak piano stool. My next project! It's a ruin... patina rating in the minus figures. So I will take all the old shellac off.

    How would you finish the stool??? I want it to be a medium brown colour. Wax, Cabots satin finish, stain and something??

    Thanks in advance. Tills

    PS Check out my picture of the "hallmark on furniture" and let me know if you have seen anything like it.

  2. #2
    Join Date
    Sep 2008
    Location
    Jimboomba Qld.
    Age
    69
    Posts
    0

    Default

    No help on the makers mark! sorry

    As for the stool, if you want to keep it authentic? brownish colour would be Van Dyke crystals. (Water soluble) then re shellac and finish with a good polish. I use black Bison.

    Cheers


    Steve
    Discover your Passion and Patience follows.
    www.fineboxes.com.au

  3. #3
    Join Date
    Aug 2010
    Location
    brisbane
    Posts
    19

    Default Thanks!

    Sounds good Steve. I shall have to experiment on an old piece of silky oak. Only problem I have is with shellac. I have never used it because I have had to remove old layers of the stuff on previous, small pieces of furniture. On one little table, the top had cracked up like an old oil painting.

    Is there an alternative to shellac? If not, can you give me some hints about using it?

    Pity about the makers mark! It may remain a mystery. Cheers, Tills

  4. #4
    Join Date
    Dec 2009
    Location
    Aspley, QLD
    Posts
    0

    Default

    Wipe on poly goes well on silky oak (3 coats), perhaps over your stain of choice and followed by a buffed up wax. At least thats my newbie opinion...

  5. #5
    Join Date
    Aug 2010
    Location
    brisbane
    Posts
    19

    Default Thanks.

    Sounds good! But what sort of wipe on poly do you use. and how do you wipe it? And do you find that with each coat the wood becomes a little darker? I have used Cabots satin sheen with good results on darker silky oak pieces. But I suspect this is nothing short of heresy to those who kow how to apply shelac and wax. Steve is going to give me some extra help with this alternative.

    Thanks for you reply... perhaps you could check out my makers marks on my first post. Seen anything like it? Cheers, tills

  6. #6
    Join Date
    Dec 2009
    Location
    Aspley, QLD
    Posts
    0

    Default

    I think its Minwax satin wipe on poly. Im away from home for a week so cant be sure. I "wipe it on" with a small piece of old T shirt rag. Not sure whether the wood becomes darker with repeat coats but certainly comes up better and highlights the grain. I'll post a photo when I get a chance.

    I had a look at your makers mark. Very unusual. I expected it to be centered and perfectly square. I havent seen anything like it, but this is where my novice tag kicks in.
    Are you sure its not apple cedar or even apple cider...

  7. #7
    Join Date
    Aug 2010
    Location
    brisbane
    Posts
    19

    Default Photo.

    Would love to see a photo of some of your work. I will definitely explore the wipe on poly and will let you know how I get on with shellac.... if you are interested.

    Loved you comments about my makers mark. Perhaps the entire little table was made by an amateur with a sense of humour??
    Cheers, tills

  8. #8
    Join Date
    Dec 2009
    Location
    Aspley, QLD
    Posts
    0

    Default

    Here's a pic of silky oak (same age, from same tree) with carnauba wax on left, and wipe on poly on right.
    How did you go with the shellac?

  9. #9
    Join Date
    Sep 2010
    Location
    nr Edinburgh, Scotland
    Posts
    19

    Default

    Hi there!

    I must confess I am definitely in favour of the shellac option over a modern finish!

    The most common mistake when re-staining is to leave some old bits of finish on, which means the new stain goes on unevenly. So the most important thing you can do (imho) is to make sure you get rid off all the old finish.

    Then you can plough ahead with the staining.

    all the best
    Anselm
    Check out the Chippendale International School of Furniture for intensive cabinet making courses in Scotland.

Similar Threads

  1. Silky Oak finishing help
    By irish in forum FINISHING
    Replies: 4
    Last Post: 3rd March 2008, 10:58 PM
  2. Silky Oak Finishing
    By Krispy's Sister in forum FINISHING
    Replies: 6
    Last Post: 23rd January 2007, 01:10 PM
  3. Finishing Silky Oak
    By Sam Bridgham in forum FINISHING
    Replies: 2
    Last Post: 9th March 2005, 09:37 AM
  4. Finishing Silky Oak
    By Eastie in forum FINISHING
    Replies: 3
    Last Post: 22nd March 2002, 11:14 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •