Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Blackwood Dining Table
-
1st November 2011, 08:14 AM #1
Blackwood Dining Table
Hi everybodies,
This is a 1.8m x 1.0m Tassie Blackwood dining table, finished in Hard Burnishing Oil.
The client wanted a "floating top", so I used three struts to hold the top in place and bolted the top on through these bearers and into the top.
Regards,
Rob
-
1st November 2011, 09:07 AM #2
-
1st November 2011, 10:12 AM #3GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 1,621
-
2nd November 2011, 12:38 AM #4
Very nice work Bob, love the top.
Just a reminder about the hazards of working with blackwood, particularly if anyone is unaware.
The saw dust from blackwood can cause serious lung problems, so make sure you wear a dust mask when working with it.
SteveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
2nd November 2011, 05:19 PM #5GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
Did you use slotted holes for the bolts holding the top?
-
2nd November 2011, 09:29 PM #6
Nice remote on the router table.
SBPower corrupts, absolute power means we can run a hell of alot of power tools
-
3rd November 2011, 12:43 AM #7
Interesting design.