Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    28

    Default Old pommy furniture

    Hi,
    I have taken possesion of 4 old wooden dining chairs and 13 seater bench (all matching) that my mum brought over from England when she migrated about 50 years ago. Mum was given these by her parents so these bits are getting very old now.
    They have seen better days and are in need of alot of TLC. all the joints are getting wobbly and the bench has a broken leg that will need matching and replacing.
    I live in the Ryde area in NSW and need to find some one who can tell me what timber it is (I think it's european ash?) and can spin a new leg or 2 up for it.
    Seeing all the joints are loose would it be a good idea to pull these chairs apart and clean the wood up and then reassemble them.
    they are quite complex (IMO) as they have leg that have been turned on a lathe and the backs are also made up of about 7 vertical rods
    any advise on this job would be greatly appreciated.

  2. #2
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    0

    Default

    Thats one special looking chair there deserving a good restoration

  3. #3
    Join Date
    Oct 2007
    Location
    Melbourne, Australia
    Posts
    10

    Default

    hi there backyarder, looks like you've got yourself a set of Ercol chairs. Any have a sticker or stamp under any of the chairs? In this golden colour, they were crafted in Elm. It's hard to say though without a closeup of your seat. (the chairs seat that is!!) Beech was another timber popularly used.

    Vintage Ercol are pretty popular in the UK, but quite sought-after here in OZ. Check out ebay.co.uk to find ones like yours.

  4. #4
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    Quote Originally Posted by CuriousBird View Post
    hi there backyarder, looks like you've got yourself a set of Ercol chairs. Any have a sticker or stamp under any of the chairs? In this golden colour, they were crafted in Elm. It's hard to say though without a closeup of your seat. (the chairs seat that is!!) Beech was another timber popularly used.

    Vintage Ercol are pretty popular in the UK, but quite sought-after here in OZ. Check out ebay.co.uk to find ones like yours.
    If they're ercol most likely elm seat and beech for the rest. Ercol used to cost a fortune new and probably still do. Couldn't afford them when newly married.
    As a matter of interest the company was founded in the uk by an italian family called Ercolini.
    Jim

  5. #5
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    28

    Default

    It's is Ercol furniture, I found thr stickers.
    Done some research and have found that it is indeed quite expensive now. each chairs is around 700. AUD for an original (I have 4) a repro 2 seater "Love seat" around 1800 pounds, the dinning table about the same, rocking chair and sideboard not sure.

    I have just had 2 new legs turned up for the love seat but have discovered that the actual bench seat part which is made up of 3 peices of timber is coming apart on the back joint and needs to be reset.
    How do I pull the joint apart
    Not sure if it's just glued or if its dowelled as well as glued
    any advise would be welcomed.
    thanks

  6. #6
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    If your intending to sell them, best let the owner fix them,
    Chairs are fiddly to take apart and reglue, you'll need clamps and patience.
    Unless you have done this before, I suggest you take them to a pro

    They have to be pulled apart carefully, number all joints or you'll never get them back "true"
    All old glue cleaned out of holes and off dowels, if you break a dowel while trying to pull em apart, you'll have to drill out the old dowel.... dont mean to discourage you but it's not simple.
    I suggest you pick up an old chair from an op shop or hard rubbish, (and i do mean pre 50's) Pull it apart and practice on that.
    Then you'll know if you want to tackle these good ones.

    Astrid

  7. #7
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    I'll second that. Don't touch them! You'll certainly devalue the furniture if you do anything to them. You won't get top dollar for them unless they're perfect, but it would be a shame to devalue them further by inexperienced or unsympathetic restoration.

    Being Ercol, you'd get a better price for it all in the UK (assuming you're selling them). Let someone over there take them on and address the restoration.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  8. #8
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    28

    Default

    I intend on keeping these pieces for daily use in my house.

  9. #9
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    I would seek out a competent restorer who will repair the furniture sympathetically. Don't be afraid to ask what glue and techniques they will use. It's your furniture and you want it to retain its value.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  10. #10
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    If they were ordinary straight up and down chairs, you could have a go yourself. (after a practice few).
    But the slopes and spindles and angles on these will make glueing up a nightmare without 4 hands and all sorts of clever chocks for your clamps.
    I'm a proffessional restorer, not in Woodwoulds class but but i've retored hundreds of chairs. I wouldn't touch these, their out of my class.
    you really do need a restorer with all the right equiptment.

    Astrid

  11. #11
    Join Date
    Jul 2006
    Location
    Durong Qld
    Age
    63
    Posts
    0

    Default

    Perhaps if you were intent on doing it yourself, you could try and build yourself a replica first What fun that would be.

    Donna

  12. #12
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    28

    Default

    I'm in the Ryde area of Sydney, does anyone know a good restorer around these ways?

  13. #13
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    sorry, I'm in melb dont know any restorers in sydney.
    try putting a post in the employment forum.
    I'm sure there must be someone here that can do it.

    Astrid

  14. #14
    Join Date
    Oct 2006
    Location
    Melbourne
    Posts
    0

    Default

    This thread may be of interest to you back yarder.
    .
    I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.


    Regards, Woodwould.

  15. #15
    Join Date
    Sep 2007
    Location
    Sydney
    Posts
    28

    Default

    thanks for all the advise
    I am slowly working on the good chairs that don't need glueing
    Not usre about the 2 seater, the joint in the seat base that is slightly coming apart needs to be fully split cleaned up and then rejoined but not sure how to split it.
    I would not worry about it but this part of the seat base alos hold the vertical posts for the back rest and when you lean back the joint flexs abit.
    does anyone know how to split this joint it is the length of the bench approx 4 feet long
    cheers jamie

Similar Threads

  1. Jokes from pommy land
    By DavidG in forum JOKES
    Replies: 2
    Last Post: 27th October 2005, 09:24 AM
  2. New furniture
    By Richard in forum FINISHING
    Replies: 9
    Last Post: 1st September 1999, 11:40 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •