Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2009
    Location
    Sydney
    Age
    37
    Posts
    3

    Default Filling screw holes in metal roof

    I知 removing the old solar pool heating off my roof and need to fill approximately 20 screw holes.

    I知 thinking of filling the holes with sikaflex, then inserting a larger diameter screw. The problem is, some of the holes have no timber roof beams underneath so not sure if it値l seal properly. Does anyone have any experience in this and can point me in the right direction?

    Cheers,
    Andy

  2. #2
    Join Date
    Oct 2006
    Location
    Tallahassee FL USA
    Age
    82
    Posts
    0

    Default

    Unless the holes are huge, I'd attach fender washers to the metal roof with large sheet-metal (self-tapping) screws, in addition to the sikaflex. The timber would be irrelevant, but could still be penetrated if there.

    Cheers,
    Joe
    Of course truth is stranger than fiction.
    Fiction has to make sense. - Mark Twain

  3. #3
    Join Date
    Jan 2005
    Location
    Campbelltown NSW
    Age
    78
    Posts
    68

    Default

    Depending on the hole size 4.8mm sealed rivets might be suitable with the sealer. Alternatively this tape https://www.bunnings.com.au/consolid...-tape_p1100467 works really well on metal rooves.

Similar Threads

  1. Filling big holes to make smaller holes
    By Sir Stinkalot in forum GENERAL ODDS N SODS
    Replies: 9
    Last Post: 4th October 2003, 01:51 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •