Thanks: 2
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
19th February 2014, 11:31 AM #1
Where to get a fixed base router motor-only?
Hi all
I've never ventured into this sub-forum before.
I'm looking for a fixed base router similar to the Ported Cable 75182, and I'm thinking that maybe ou CNC people have a handle on what may be available in either Oz or Europe. I could fool around with voltage converters for 110v I suppose, but I've also heard that Porter Cable quality control isn't what it used to be (now that they're made in Mexico).
My requirements would be:
at least 2HP
Variable speed 5,000 to 20,000 approx
ability to have ¼", ½", 8mm, 12mm collets
quality built
It would be going into a router-lift, so I can't think of too many other features that would be required.
Maybe something like this? (thanks to Saisay for leading me there).
As I understand it, there are no Router motor-only available in Oz - is that correct?
-
19th February 2014, 12:38 PM #2Senior Member
- Join Date
- Sep 2012
- Location
- ont Canada
- Posts
- 399
try this one
google MLCS in the states they sell a porter cable look a like 3,25 hp for 209.95 US funds
Also I have a pair of the porter cable 7518 variable speed and all you do is replace the s**t bearings and they are good to go
and stay away from the 21000rpm.
I run at 16k all the time,after 4.5 hrs its warm to touch,before it was hot hot
-
19th February 2014, 12:43 PM #3GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Port Huon
- Posts
- 1,917
-
19th February 2014, 12:56 PM #4
Thanks for that Geoff. It might be a little under powered at 900w. I find also that I use my Triton down around 10,000 rpm quite often to avoid burning.
Maybe the solution is a 110v jobbie with a converter.....
Incra aren't allowed to export their Porter Cables (by agreement) which is a bit silly seeings how they aren't available here. Anyway, there are ways around that.