Results 1 to 2 of 2
Thread: Ubeaut Trad wax over 2-pac?
-
10th May 2005, 10:01 PM #1
......say what?
- Join Date
- Feb 2005
- Location
- Melbourne, Australia
- Age
- 47
- Posts
- 0
Ubeaut Trad wax over 2-pac?
Hello ye ole wise one's,
polishing a Baby's change table at the moment made from Jarrah and Vic Ash. I really wanted to do a Danish Oil and Trad wax finish, however time constraint's have forced me to use (quick) Mirotone Poly 2-pac. I am attempting to immitate an oil finish by using only 2 coats of very thin polish, and then wish to hand rub-n-buff on some sweet smelly Tradition wax. I have read from the info that it is suitable over lacquers, but has anyone done this, thought's and comment's greatly appreciated.
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
11th May 2005, 02:11 AM #2
Pancakeus Incredibulus
- Join Date
- Jun 2004
- Location
- Perth WA
- Posts
- 780
Well I dunno but you should ask Christopha what type of sanding sealer to use under Shellawax
.
Have you got the "Book" or had a look at the Ubeaut website?.
CheerSquizzy
"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" {screamed by maths teacher in Year 8}
Reply With Quote
Bookmarks