Thanks: 0
Likes: 4
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Only New to this clock stuff
-
10th April 2015, 08:58 PM #1
Only New to this clock stuff
Well I am only new to clock and have been making some basic stuff and a little bit more involved. I think they have come up quite well and look forward to getting deeper into them as time goes on. I am interested to her your thoughts?
Cheers Ian
IMG_4135.JPGIMG_4150.JPGIMG_4165.JPGIMG_4174.JPGIMG_4179.JPGIMG_4185.JPGIMG_4190.JPGIMG_4207.JPGIMG_4214.jpgIMG_4150.JPG
-
10th April 2015, 10:24 PM #2
you gotta change that logo dude.
Every time I see it it looks like a +C and not a H.
The C is the same as the one in Custom.
-
10th April 2015, 10:39 PM #3
I really like the golf one Dorno. I like the others too but the high gloss finish leaves me flat.
It appears the punters don't agree as I see a lot like this at craft markets so they must sell.
Cheers, ian"The common law of business balance prohibits paying a little and getting a lot.. it can't be done.
If you deal with the lowest bidder it is well to add something for the risk you run.
And if you do that, you will have enough to pay for something better"
-
11th April 2015, 09:41 PM #4Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 694
Like Nanigai I am not a fan of the high gloss finish.
I have a personal preference for burls to be turned into pens.
-
11th April 2015, 10:18 PM #5SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 658
Hi I have made quite a few clocks probably about 20 or so and have only used burls once (once too many)
Personally dont like using burls and especially not with high gloss finish.
Be careful with the Roman numerals as they look odd if you put them on upside down.
-
11th April 2015, 10:19 PM #6
Artme I too like to make pens out of burls but they can also be used for other things as regards to the finish I like to use other stuff too but the customers are always right and they seem to want the Gloss so my hands are tied
Cheers Ian
-
11th April 2015, 10:30 PM #7
-
12th April 2015, 11:38 AM #8SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 658
Similar Threads
-
Clock mouldings for old clock
By T5AUS in forum RESTORATIONReplies: 1Last Post: 8th September 2009, 11:23 PM