![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: Newbie
-
11th May 2014, 08:06 PM #1
New Member
- Join Date
- May 2014
- Location
- Tamborine, Qld
- Posts
- 1
Newbie
Hi all from sunny Queensland. I like to tinker in my shed with a bit of wood turning/work and also a bit of metal work. Like most blokes it's my escape from the everyday grind. I would welcome suggestions/comments/advice on my work. Cheers
-
11th May 2014, 08:39 PM #2
Looks like you are well on your way already with that contribution. Welcome aboard and may you enjoy many years of help and camaraderie here.
Dallas
-
11th May 2014, 11:13 PM #3
Welcome Col,
Looks like your off to a flying start with your introduction and with photos of your work too
I think you will fit right in in here
Cheers & Welcome
Tony.
-
12th May 2014, 11:14 AM #4
GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 69
- Posts
- 1,570
Welcome to the forum Col.
-
12th May 2014, 05:23 PM #5
Welcome to the forum.
There is a dedicated sub-section of wood turning. Two ways of accessing is via the drop down menu on the top left of the page or via this link, https://www.woodworkforums.com/forumdisplay.php?f=8
There is also a working with wood show on this weekend. As you are a member you can get a discount on the entry ticket. https://www.woodworkforums.com/showthread.php?t=183548
Or if you are really keen you can help out at the forum stand for an hour or so. Really easy just hand out flyer and talk about your knowledge of the forum. https://www.woodworkforums.com/showthread.php?t=183551 Of course you might be limited in that regards but that never stopped others.
-
13th May 2014, 08:17 AM #6
G'Day & Welcome to a top forum "Col".
There are a heap of members around Brisbane/Gold Coast areas and across S.E. Queensland.....
You'll find a heap of helpful & knowledgeable blokes & ladies on the forum and for most very willing to assist.
Make sure you keep showing off your handiwork as everyone loves a photo, especially WIP [Work In Progress] photos with build notes.
Enjoy the forum.
Enjoy your woodwork...
Cheers crowie
PS - You've jointed just in time for the Brisbane Woodwork Show
HELP WANTED to man the Forum Stand at:BRISBANE - Timber & Working With Wood ShowRNA Showgrounds, 16, 17 & 18 May 2014To volunteer CLICK HERE All volunteers get FREE entry to the show.Unable to help out , CLICK HERE for more info and discounted entry.
-
15th May 2014, 06:58 AM #7
welcome to the forum