Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
12th July 2014, 12:31 PM #1SENIOR MEMBER
- Join Date
- Oct 2012
- Location
- brisbane
- Posts
- 831
Incra ultra Jig + Instruction and booklets
Woodworkers clean out. Incra Ultra jig for router table or table saw. These were very expensive when new. Hardly used and very good quality. The plywood has been sitting on the concrete and pickup up a little bit of damp and mould. It is still fine but could be replaced if it is visually off putting. Everything else is in perfect condition. It has the instruction booklets (not shown) and a separately purchased book on applications for the Incra Ultra including box joints, dovetails etc. Asking $250 the lot.
This is not an auction. Just reply “I’ll take it” and they’reyours.
Pickup in Brisbane at Ascot.
-
15th July 2014, 12:18 PM #2Member
- Join Date
- May 2009
- Location
- Newtown, Sydney
- Posts
- 94
post to sydney????
Hi Flindersia
Im keen, but would you be prepared to pull apart and post to sydney??
Jason
-
15th July 2014, 12:47 PM #3Senior Member
- Join Date
- Aug 2008
- Location
- Pimpama
- Age
- 54
- Posts
- 101
Hi Flindersia,
If the arrangement with jbarch doesn't work out, I'll take it with pick up at a suitable time.
jaksam
-
15th July 2014, 07:08 PM #4SENIOR MEMBER
- Join Date
- Oct 2012
- Location
- brisbane
- Posts
- 831
All yours
Sorry jbarch, but after a few days of packaging turning chucks,pens, clocks and various other items of paraphernalia I think I’m over theinterstate shipping thing. I should have made this clearer in the add but Ithink the Incra would be a challenge to pull apart and package safely. Hence,It’s all yours jaksam on the basis of local pickup. PM on the way.