![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
31st October 2013, 04:10 PM #1
Drilling through tiles and in to concrete
Hi All,
We have a concrete porch at our front door that we just got re-tiled. I want to put the old balustrade back in place (due to 1 mtr + drop on the other side). I am planning to use ankascrews to fix in to porch and one end in to brick wall. Any tips for drilling through the tile first before I attack the concrete with a masonry bit? Also hoping I avoid the old dynabolt stumps that are in the concrete but any advice if I do hit them? I don't have a lot of play to move the balustrade around on the porch so once I start drilling I will be committed.
Cheers.
Read the full thread at RenovateForum.com...
Similar Threads
-
How thick concrete slab under outdoor tiles?
By Reno RSS Feed in forum CONCRETINGReplies: 0Last Post: 5th April 2009, 03:00 AM -
How thick concrete slab under outdoor tiles?
By ubeaut in forum CONCRETINGReplies: 0Last Post: 3rd January 2009, 07:10 PM -
Drilling in hard concrete possibly into rebar.
By Duramen in forum CONCRETINGReplies: 16Last Post: 15th June 2005, 09:12 AM