![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: New Hercus tool grinder
-
26th January 2024, 06:30 PM #1
Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,458
New Hercus tool grinder
I picked up a Hercus tool grinder today. I am new to these and have a couple of questions, with more to come no doubt.
In the second photo there is a nut. Is loosening the nut all that is required to change the angle of the spindle in relation to the table. Nothing moves and I don't want to force things.
A manual would be handy but first I will need to work out exactly what model I have. I could not see a serial number or data plate.
It seems in reasonable nick but it appears that the spindle has been greased. Should oil have been used? If so I will strip and clean. It looks like someone has used grease on all points.
I could not get the first photo to be the correct way.
20240126_161316.jpg20240126_161326.jpg
Attached Images
-
20240126_161316.jpg (178.5 KB)
-
20240126_161326.jpg (166.3 KB)
Read the full thread at metalworkforums.com...