Thanks: 0
Likes: 10
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 19
Thread: Old Hand Saw Help
-
19th August 2013, 03:49 PM #1Senior Member
- Join Date
- Aug 2010
- Location
- Wisconsin, USA
- Posts
- 151
Old Hand Saw Help
I picked up a hand saw at a garage sale and I've never seen one like it. The handle has 4 rounded-head saw nuts on top of a metal (brass?) plate, which is on top of the handle. The blade measures about 26" and there is no medallion. Another thing -- the blade metal looks almost like brass -- it has a yellowish color to it. The blade is labeled with 6 teeth per inch where a Disston mark would be. Oh, and it also has a nib. I'll include pics.
Thanks.
IMG_0783.JPGIMG_0784.JPGIMG_0785.JPGIMG_0786.JPG
-
19th August 2013, 04:57 PM #2Senior Member
- Join Date
- May 2013
- Location
- South Africa
- Posts
- 158
I cant help you but the guys from this site sure would be able to: backsaw.net
almost looks like a spear & jackson but I don't recall any of their saws having that metal plate on the handle.
-
19th August 2013, 05:59 PM #3
There's a lot of saws with side plates like that, but Jesse Lane looks the closest I can find at the moment, The S&J Aetna with side plates I think only had 3 screws, but later S&J version of the same model might have had 4 screws, but the handle shape on the S&J is different, so I think S&J is out, Maybe Disston Standard? but for now Jesse Lane is my best guess.
IMG_1852.JPG
Jesse Lane ( courtesty of Marv )
Regards
Ray
PS I think The Jesse Lane brand is now manufactured by Flinn Garlick aka Pax etc etc,.
-
19th August 2013, 06:11 PM #4Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
There is a good chance the dome nuts and brass plate are not original parts to the handsaw. If you look at the 3rd photo that shows the back of the handle the fitted saw screws have a much smaller head compared to the original bore holes seats on the handle. If you were to remove the brass plate and find the same thing was obvious then that would confirm to you that it is not an original fixture. If you were to find a single larger counter bore in the mix on the face side of the handle this confirm that the handle was originally fitted with a medallion. As for the maker of the handsaw I cant help you with that question.
Stewie;
-
20th August 2013, 12:01 AM #5
This was a phase that handsaws went through ... probably roughly 1900+- ... S&J catalogue that Holmesy has shows they could be ordered with side-plate as optional. I'd say the nuts and plate look about right for others I have seen.
Toby enquired after his one a while back ... there were several mentioned then ... I didn't know much back then as you can tell from my 'contributions'
I think the Disston 'enterprise' saw was their side-plated model.
I'll find the link.
Cheers,
Paul
-
20th August 2013, 04:19 AM #6
https://www.woodworkforums.com/f152/m...elp-id-151848/
It is the 'standard' not the 'enterprise' ... as RayG points out in the link.
The 'enterprise' had a square and a ruler built in to it ...
disston enterprise.PNG
Paul
PS ... I read some other posts about posting photos ... easiest way I know is ..
-
20th August 2013, 08:55 AM #7Senior Member
- Join Date
- Aug 2010
- Location
- Wisconsin, USA
- Posts
- 151
After reading the posts, I have a couple things to add that I noticed. While some of the saws are similar, on my saw the top part of the handle plate comes to a point (see pic). None of the others looked like that. Also, I looked at the blade more closely and found some writing. Several times, the letters "WALSH" or possibly "H WALSH" are stamped on the blade in small, block letters (about 1/8" high letters). This might be the name of a previous owner, making absolutely sure everyone knew it was his saw -- not sure. I'll attempt pictures of that as well. And does the fact that it has a nib near the end of the blade mean anything?
Thanks.
IMG_0793.JPGIMG_0787.JPGIMG_0790.JPGIMG_0792.JPG
-
20th August 2013, 11:28 AM #8
Got a magnet? I would be astounded if it was brass!
"Life would be infinitely happier if we could only be born at the age of eighty and gradually approach eighteen."
Mark Twain
-
20th August 2013, 12:52 PM #9Senior Member
- Join Date
- Aug 2010
- Location
- Wisconsin, USA
- Posts
- 151
Nope, not brass
-
20th August 2013, 02:28 PM #10
Just a guess at the colour, but it appears to have been pretty enthusiastically cleaned with a rotary tool which may have imparted the bronze tinge. I have a wire wheel that does that.
...I'll just make the other bits smaller.
-
27th August 2013, 05:17 AM #11Senior Member
- Join Date
- Feb 2012
- Location
- Adelaide
- Posts
- 439
of course its not a brass saw (that would be like JC pawning jewlery) , all things considered there may have never been a brass saw conceived in all history, quite possibly, who knows! waste of time if they did.
i forget the brand but it looks just like one i have, starts with a 'B' (i could check i guess), more TPI and for some reason the nib looks a long way back, even though the saw plate appears to have some meat left on it, fine-ish toothed (for what it is) but otherwise not an unusual saw to my eyes...anyways, an old-ish yanky brand i would guess, imitating the english type saws....
cheers
chippy
-
27th August 2013, 06:24 AM #12
When you said 'B' Chippy I started thinking 'Brown' and 'Bakewell' ...
It's quite handsome-looking I think ... quite similar to this Wheeler Madden & Clemson of Mike Stemple ... (but prob not actually them) ...
https://plus.google.com/photos/11674...95154356019985
Cheers,
Paul
-
27th August 2013, 09:44 AM #13
-
27th August 2013, 10:25 AM #14
Looks like they had trouble getting good saw files on Crete back then too.
...I'll just make the other bits smaller.
-
27th August 2013, 11:10 AM #15