Results 1 to 14 of 14
  1. #1
    Join Date
    Feb 2008
    Location
    Alstonville NSW
    Posts
    4

    Default Old Silky Oak furniture with shoe polish staining

    We have inherited a dining table and sideboard made from Silky Oak that have been stained dark brown with shoe polish (ie. all over on purpose). These are about 100 years old and were made by our family from trees on their property on the Far Nth Coast of NSW. They are well made and worth keeping. My mother-in-law explained that the furniture has been stained with dark brown shoe polish over the years to make it look like English oak.

    We would like to remove the shoe polish, if possible, to see the natural silky oak timber. Are there any ideas about removing the polish and finishing them? Is it something that we could do ourselves, or is it a professional job? We don't have any experience in wood finishing but we would like to have a go.

  2. #2
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs down Silky Oak and shoe polish

    Welcome to the best font of knowledge in the cyber universe Diane. Here you will find differing measures of ratbagerry, wit, wisdom, opinions and attempts at helpfulness. Should you wish to continue then be it at your own peril.
    With regard to your problem the first thought that comes to mind is "sacrilege"!!!, but that is of no help whatsoever.
    I suspect the polish may well have penetrated some way into the timber and, because of the nature of the polish sanding will not be an option. I woul also avoid the use of metho and strippers for the moment.
    To mee the best way to get rid of this damnable horror is to scrape the whole thing..
    Try this in a not so obvious place.

  3. #3
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Shoe polish is wax based AFAIK. I'd be inclined to try some Prepsol or a similar oil and wax remover available from most automotive spray painting suppliers. Obviously if the wax is on quite thick and can be lifted off with a fingernail scrapiong off the excess with a stiff plastic spatula or similar would be a good start.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  4. #4
    Join Date
    Feb 2008
    Location
    Alstonville NSW
    Posts
    4

    Default

    Thanks for the quick feedback. We agree that it sacrilege- they are good solid pieces of furniture but they look tacky as the staining/polish is uneven and we don't like the dark brown/black colour. The shoe polish is absorbed well into the wood. We can see the grain of the silky oak where it has been worn thorough. We don't want to continue using shoe polish and we would really like to see the natural silky oak wood.

    We will do some tests in a hidden area to see what will work.

    Any other ideas out there?

  5. #5
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    lacquer thinners might remove the bulk of it
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #6
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    0

    Default

    This would not be for the faint hearted. I once watched my Boss (a cabinetmaker in his 70's who had been restoring furniture all his life) set fire to a small table top that had been impregnated with finish. He said it was the quickest way to get rid of the stuff. Must admit I wouldn't ever do it. I'd be too scared of unintended consequences.

    me
    The other day I described to my daughter how to find something in the garage by saying "It's right near my big saw". A few minutes later she came back to ask: "Do you mean the black one, the green one, or the blue one?".

  7. #7
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Default Sacrilege

    My original opinion on how to remove this material still stands. I would not use any substance likely to push the polish deeper into the grain.
    Silky Oak is fairly porous and mechanical means of removal, IMHO, is the only way to tackle this problem successfully.
    I speak from some experience. Some years ago I dismantled, stripped and refurbished some cairs that had some disasterous dark "stuff" on them.
    My first attempt to remove this rubbish involved stripper, metho and lots of elbow grease. Some success but mostly the result was to drive the colour of the "stuff" into the timber.
    I successfully finished the whole job in short order by scraping the offending garbage off, scraping the exposed timber and then sanding.

  8. #8
    Join Date
    Sep 2006
    Location
    Taree Mid North Coast
    Age
    81
    Posts
    0

    Default

    G'Day Diane

    Have a look at http://www.goclean.com/shoepolish.htm

    Cheers
    Bernie

  9. #9
    Join Date
    Sep 2007
    Location
    Armadale
    Posts
    887

    Default

    Try humble turps and fine (0000 grade) steel wool first.

    Astrid

  10. #10
    Join Date
    Feb 2008
    Location
    Alstonville NSW
    Posts
    4

    Default

    Thanks for all of the ideas. This is an amazing forum. We will try a few of the ideas and get back to you.

  11. #11
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Question Table stripping

    Wot's happening???

  12. #12
    Join Date
    Feb 2008
    Location
    Alstonville NSW
    Posts
    4

    Default mechanical shoe polish removal

    We had a go at using turps and fine steel wool today. This seemed to work reasonably OK on the legs with the majority of the polish coming off. There is some polish left in the grains of the wood, which will not come off using this method. It was harder to remove the polish from the top of the table-I guess there has been much more polish and elbow grease gone into the top. This method is not going to work for the top.

    I think we will give it all a quick go over with the turps and then we'll have to use some mechanical means. We have an orbital sander1/3 sheet and a belt sander. There was mention of using a scraper. What do you suggest we use?

  13. #13
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208

    Default

    unless you are expereieced sufficiently not to leave ridges with the belt sander, don't use it on the top. Stick with the orbital.

    Though a proper (furniture type) hand held scraper would be my first choice
    Regards, Bob Thomas

    www.wombatsawmill.com

  14. #14
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Default Removing polish

    Agree with Echidna, even if he is a confused wombat.
    Using a sander will also cause polish to melt and you will have a gluggy mess.
    Get a cabinet scraper and use it gently, until you figure out how well you can use it.

Similar Threads

  1. Replies: 4
    Last Post: 12th January 2008, 05:26 PM
  2. Furniture polish for ebony-finish piano
    By Lumber Cruncher in forum FINISHING
    Replies: 4
    Last Post: 29th September 2006, 10:52 AM
  3. Home Brew Furniture Polish
    By Shane Watson in forum FINISHING
    Replies: 4
    Last Post: 17th August 1999, 11:33 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •