Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: A vent

  1. #1
    ozhunter's Avatar
    ozhunter is offline Quantum materiae materietur marmota monax si marmo
    Join Date
    Jan 2009
    Location
    Bathurst NSW
    Age
    56
    Posts
    0

    Default A vent

    Didn't know where to post this, but anyway.

    I went to my local branch of a large hardware chain today. I have had them cut sheets of ply on the panel saw they have in the timber shop, on previous occasions.

    I wanted to get some Formply cut on the panel saw, because I'm not set up to handle big sheets at the moment, and it's difficult and dangerous by yourself anyway, so I said to the pleb behind the counter, can I get some Formply cut on the panel saw. No, was the reply. It wrecks our blade, she says. Why in hell would you have saw in a hardware shop and not be prepared to use it, just because it might be a bit hard on the blade. There is a fee to have them cut the sheets, all-be-it a small one, and I'm sure the blades are not that dear,but struth, a hardware shop that won't use a saw for what it's designed to be used for. It just shows how far down the toilet things are going I reckon. I was a frequent visitor, at least weekly and sometimes more, but as long as my backside points to the ground, I'll never set foot in there again. They won't miss my custom, but it's just ridiculous that such a large business won't do something like this for their customers. What else is a panel saw for, anything with a blade will wear the blade out or get bluntened from use.

    When I got home I rang the store and tried to speak to someone higher up the food chain than the broom jockey I got the first time, but got no where - not that I expected to.

    I went to Mitre 10 but they don't have a panel saw, so I'm screwed and pretty wild to.


    Bah humbug to them.

    Just had to have a little vent.
    If you find you have dug yourself a hole, the first thing to do is stop digging.
    I just finished child-proofing our house - but they still get inside.

  2. #2
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    That sounds like a decision made by a half-wit bean counter who has no idea of a customers's needs.
    If it really does blades serious damage what do they expect the people buying the stuff to cut it with ?
    They could always charge a higher fee for cutting the form ply to cover the cost of blades.

  3. #3
    Join Date
    Apr 2011
    Location
    Dandenong, Vic
    Posts
    0

    Default

    Did you ask if they could direct you to a real hardware store in the area?

  4. #4
    ozhunter's Avatar
    ozhunter is offline Quantum materiae materietur marmota monax si marmo
    Join Date
    Jan 2009
    Location
    Bathurst NSW
    Age
    56
    Posts
    0

    Default

    Bob, that would be too much like common sense.

    fly, I had to leave the shop before I said something that I would have regretted later. Although I'm pretty sure the exclaimed "What!" and the vigourous head shaking as I walked away was an indication of my joy.

    Ended up going to Mitre 10 and getting the full sheets. Bought them home with the intention of cutting them up with my circular saw - a painful exercise, but it would have go tthe the job done. Went looking for the old faithful Makita......now where did I put that......oh crap, my brother borrowed it and it has never returned home. Only option left was the cordless DeWalt circular saw. It did the job, but would have been so much easier on the big panel saw.
    If you find you have dug yourself a hole, the first thing to do is stop digging.
    I just finished child-proofing our house - but they still get inside.

  5. #5
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by BobL View Post
    If it really does blades serious damage what do they expect the people buying the stuff to cut it with ?
    What, you reckon they think about that??
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  6. #6
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    Memo - don't buy blades from them.
    Cheers,
    Jim

  7. #7
    Join Date
    Jun 2004
    Location
    Mornington Peninsula
    Age
    49
    Posts
    0

    Default

    Duty of care maybe? They have the ability to break down large sheets into manageable sizes but refuse. Any injury sustained through managine large sheets could be paritally attributed to their lack of service?
    It's only a mistake if you don't learn from it.

  8. #8
    Join Date
    Nov 2007
    Location
    Melbourne
    Posts
    20

    Default

    Quote Originally Posted by ozhunter View Post
    Didn't know where to post this, but anyway.

    I went to my local branch of a large hardware chain today...............

    When I got home I rang the store and tried to speak to someone higher up the food chain than the broom jockey I got the first time, but got no where - not that I expected to.

    ...............
    Funny you put it that way.??
    A very close relative of mine was working in head office of that company. The way she used to put is was like this... "The trolley-boys were promoted above their area of expertise.... to manage the stores" Then they tuned up at head office and made her life miserable.
    No point going higher up the chain that the poor devil sweeping the floor!

    Regards,
    Peter

  9. #9
    ozhunter's Avatar
    ozhunter is offline Quantum materiae materietur marmota monax si marmo
    Join Date
    Jan 2009
    Location
    Bathurst NSW
    Age
    56
    Posts
    0

    Default

    Sounds like it should be a Government Department. It's so silly. I almost wouldn't believe someone if they told me.

    I sent a strongly worded, but civil, email to the customer service mob. I doubt I'll hear from them though.

    Mind you, the other one is only a small step above, the girl that drives the till sits in a dark little corner, chewing gum and using single syllable replies to questions. Customer service is a thing of the past in a lot of areas nowadays.

    Although there is a little hardware shop in the Blue Mountains that is owned by an elderly German bloke, the shop is stacked to the roof with all the usual crap, but he gets in German chisels, try squares and the like, because "zat is vat ve used ven I did my apprenticeship, not like ze rubbish now", and a nice old bloke to boot. He goes out of his way to help and gives a few bucks off if you buy higher end items. I call in there everytime I go past, cause I like listening to him talk, and to gawk at the nice toys, and buy one occasionally. It's lucky FenceFurniture doesn't have wheels, or the good stuff 'd gone before I got there.
    If you find you have dug yourself a hole, the first thing to do is stop digging.
    I just finished child-proofing our house - but they still get inside.

  10. #10
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by ozhunter View Post
    It's lucky FenceFurniture doesn't have wheels, or the good stuff 'd gone before I got there.
    Hmmm. Perhaps not quite so clever to point that out. It's only about 15 mins or so on the train (yes, I know perzackly where he is). Let me know a few days before your next planned visit.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  11. #11
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Post

    Quote Originally Posted by lightwood View Post
    Funny you put it that way.??
    A very close relative of mine was working in head office of that company. The way she used to put is was like this... "The trolley-boys were promoted above their area of expertise.... to manage the stores" Then they tuned up at head office and made her life miserable.
    No point going higher up the chain that the poor devil sweeping the floor!

    Regards,
    Peter
    That is known as The Peter Principal - Promoting someone to their level of incompetence.

    Doesn't it make your blood boil?

  12. #12
    Join Date
    Dec 2007
    Location
    Gold Coast
    Age
    64
    Posts
    8

    Default

    I reckon there are several things in play here.

    More than likely the floor-jockey has either mis-interpreted a company directive or been fed misinformation from a workmate or higher-up who in turn has mis-interpreted said memo. It's probaby an eqiuipment traing or OHS isue rather than concern for saw blades. Let's face it, we've all faced ill-informed customer service at some time.

    Add that to The Peter Principle (it ain't new either, is it) and you're bound to get crap customer service followed by crap response to complaint about crap service.

    Shame you're in a rural area with slim pickings. I bet another outlet in the chain will still cut formply. I'm glad you could work out a solution though.

  13. #13
    Join Date
    Jun 2003
    Location
    ...
    Posts
    1,460

    Default

    Quote Originally Posted by dabbler View Post
    I bet another outlet in the chain will still cut formply.


    Actually it's company policy not to cut form ply to size. Some time ago I saw an official notice in the panel cutting area of the Nunawading, Vic, store directing staff not to cut formply but only chipboard or MDF for customers.

    So the rant, and all subsequent comments, are ill informed.


    Peter, who doesn't subscribe to the "Peter Principle", another ill formed assumption.

  14. #14
    ozhunter's Avatar
    ozhunter is offline Quantum materiae materietur marmota monax si marmo
    Join Date
    Jan 2009
    Location
    Bathurst NSW
    Age
    56
    Posts
    0

    Default

    Sorry Sturdee

    A month ago, they cut up 8 1200 x 2400 sheets of 19mm ply for me and didn't raise an eyebrow, and they where going to cut Marine ply, until I changed to ordinary ply to suit the job.

    In the real world, it matters little what is on a notice board in another store in another state.

    A hardware company with a policy not to use a panel saw on a panel because it's "hard on blades" is absolute BS, and penny pinching in the extreme, by a multi million dollar company.

    It's like a plumber telling a customer they won't dig a trench there, because it's "hard on the shovel".

    There is nothing ill-informed about this thread. I was fully informed twice about the "company policy". It just penny pinching crap.
    If you find you have dug yourself a hole, the first thing to do is stop digging.
    I just finished child-proofing our house - but they still get inside.

  15. #15
    I_wanna_Shed's Avatar
    I_wanna_Shed is offline Now I've got a 10x14m shed! I need a new name...
    Join Date
    Jan 2005
    Location
    Wollondilly, NSW
    Posts
    0

    Default

    Quote Originally Posted by ozhunter View Post
    Although there is a little hardware shop in the Blue Mountains that is owned by an elderly German bloke, the shop is stacked to the roof with all the usual crap, but he gets in German chisels, try squares and the like, because "zat is vat ve used ven I did my apprenticeship, not like ze rubbish now", and a nice old bloke to boot. He goes out of his way to help and gives a few bucks off if you buy higher end items. I call in there everytime I go past, cause I like listening to him talk, and to gawk at the nice toys, and buy one occasionally. It's lucky FenceFurniture doesn't have wheels, or the good stuff 'd gone before I got there.
    Which shop is that? I'll call in on my way past next time.

Similar Threads

  1. Need to vent!
    By mickelmaster in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 28
    Last Post: 10th December 2009, 04:47 PM
  2. Installing a Vent - through brickwork
    By damien in forum BRICKWORK
    Replies: 9
    Last Post: 6th December 2007, 11:13 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •