Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2009
    Location
    Perth
    Age
    37
    Posts
    0

    Default Chopping board finish

    Hi all was just wondering if this would be ok to use as a chopping board finish??? Paraffin Oil Value Plus I know it's from a vet website which makes me feel funny about it but hey it says 100% mineral oil. Thanks.

  2. #2
    Join Date
    Feb 2009
    Location
    Bristol, UK
    Age
    66
    Posts
    0

    Default

    The answer is yes but the question is why?

    You say it's a chopping board, in no time flat it will be marked by the blades scratching it.
    Dragonfly
    No-one suspects the dragonfly!

  3. #3
    Join Date
    Aug 2008
    Location
    Normanhurst NSW 2076
    Age
    82
    Posts
    0

    Default chopping board finish

    Paraffin oil is fine. Use it regularly for chopping boards. Usually two coats for new work. You dont need to put it on regularly.
    A wipe over every 3 or 4 months is adequate, but it will not go rancid that is the plus.
    The vegetable type oils/olive oil will go rancid and get into the cracks etc. In the meantime
    wipe over with soap and water and dry and it will be fine. Make sure that you buy
    chemists quality oil,. It should only cost about $5 and lasts forever. Drillit.

  4. #4
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    206

    Default Paraffin wax

    I wanted to see what other uses one can use the Paraffin wax for and after the below....not sure if I would use it. Apart from the food contact, wouldn't the coating wear off with the washing in warm water, 37 degrees is not hot?

    Paraffin wax
    is a white or colorless soft solid that is derived from petroleum and consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37 °C (99 °F);[1] its boiling point is >370 deg C.[2] Common application for paraffin wax are lubrication, electrical insulation, and candles.
    Livos Australia

    <O</O

  5. #5
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    75
    Posts
    9,670

    Default

    Foodsafe Plus Web Page Info Sheet HERE

    IHR Geelong
    Manufactures Butcher blocks, chopping boards and more and swears by Traditional Wax. Master Chef "The professionals" series 2013 used his boards benches and butcher blocks, which were such a big hit that Marco Pierre White ordered one of his Butcher Blocks for his own restaurant.

    Cheers - Neil

  6. #6
    Join Date
    May 2007
    Location
    North of the coathanger, Sydney
    Age
    69
    Posts
    0

    Default

    I've never reall used anything on my home boards

    however made one the other day out of camphor laurel
    I used some of ubeauts foodsafe plus to pop the grain and fiddleback etc (was a vanity thing really)
    looked great
    regards
    Nick
    veni, vidi,
    tornavi
    Without wood it's just ...

Similar Threads

  1. Food-safe finish for jarraj chopping board
    By zenwood in forum FINISHING
    Replies: 18
    Last Post: 5th July 2005, 01:00 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •