![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 6 of 6
Thread: oops ... lost hand brace spring
-
28th June 2014, 12:02 AM #1
Senior Member
- Join Date
- Feb 2011
- Location
- Brisbane - Southside
- Posts
- 218
oops ... lost hand brace spring
I have borrowed a friends brace and as a thankyou I thought i'd clean and sharpen it before using it & returning it. I was holding the jaws and clumsily dropped it & it bounced away from me.
The spring has come loose & bounced away ... somewhere ... anywhere. Possibly into the massive pile of shavings from the progress on my pine workbench top.
Are these springs something I can buy somewhere ? Does anyone in Brissy have some spare i can have ? I only received the brace today so I have some time before I have to return it but I'd like to return in better (and complete) condition than which i was given it.
-
28th June 2014, 09:44 AM #2
Senior Member
- Join Date
- Sep 2010
- Location
- Melbourne
- Posts
- 144
I don't know where you would get a spring from - probably nowhere unfortunately.
But if you do find out, let me know as I have just snapped one of my braces jaws in two (while holding a hex-bit) and I wouldn't mind getting some new jaws.
One possible solution that I've used in similar circumstances when losing small screws/other important metal bits, is to get one of the magnetic knife holders from IKEA or similar, attach it to the back of a broom and gently "sweep" the area where you think it may have gone. I've had some major successes putting tools back together using this method.
-
28th June 2014, 09:54 AM #3
sounds like dragging a magnet thru the shavings is on the cards.
Or vaccy the lot and then drag the magnet it thru the pile you get.
-
28th June 2014, 10:29 AM #4
Senior Member
- Join Date
- Feb 2011
- Location
- Brisbane - Southside
- Posts
- 218
i think we have a magnetic knife holder thingy from IKEA that we've never used. Great idea Michael !
Plan B will be the vacuum option fly.
Cheers guys. I have some hope after all perhaps.
-
28th June 2014, 10:37 AM #5
I know it's a bit late now, but when working on things with springs, slip a large clear plastic bag over it & your hands. That way, when (not if) the springs take off, they will be restricted in their natural desire to travel to far off places.
-
30th June 2014, 11:43 AM #6
Senior Member
- Join Date
- Feb 2011
- Location
- Brisbane - Southside
- Posts
- 218