Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2004
    Age
    54
    Posts
    28

    Default Treated Pine Fence/Screen

    Hi All,

    I'm in the process of building a simple garden fence/screen using 100mm treated pine poles and attaching vertical palings (maybe using treated pine decking) to rails. I was intending to use 75x50 unseasoned treated pine rails attached with coach bolts without cutting any housing into the poles. However someone else has suggested using seasoned 75x45 treated pine and fixing that with batten screws?

    I wanted to know firstly if the unseasoned 75x50 will be ok for the rails (I have read the post below regarding seasoned vs unseasoned and it seems that unseasoned rails would be ok). And secondly whether the batten screws will be strong enough without cutting a housing into the poles. The palings will be about 1500mm attached to 3 rails and the pole spacings are 2500mm.

  2. #2
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    FWIW I feel housing is the way to go.... even shallow but accurate rebating adds real strength

    been a long time since I did a fence, but your measurements sound good..... unseasoned timber for this application would be fine I feel.

    If batten screws are the ones used to fix corrugated sheets then they are certainly strong - of course, their depth into the material will be a big factor....I guess I would also countersink and plug them under the surface of the material for finish and added weatherproofing

    success!
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  3. #3
    Join Date
    Mar 2004
    Age
    54
    Posts
    28

    Default

    Thanks for the reply Steve.

    I decided to use the unseasoned 75x50 with a one inch rebate cut into the poles. I found that it was bit of a pain to cut straight and accurate rebates into round poles, but overall I am happy with the results.

  4. #4
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    cool...now don't be shy

    pics pics pics

    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  5. #5
    Join Date
    Mar 2004
    Age
    54
    Posts
    28

    Default

    Ok, I've only got the rails on at this stage, so once the palings are on I'll grab a photo.

    Thanks again.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •