![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 8 of 8
-
22nd January 2022, 05:35 PM #1
How to remove a gal bung from a brass fitting.
I'm wanting to put a vandal proof tap into a brass fitting on the front water line on my property that belongs to the local Council and I can't unscrew the gal bung and am wondering if anyone might know how to go about removing the bung.
An easy fix would be to cut the fitting off and fit a new one but since its not mine I don't see this as being an option.
I've sprayed it with a releasing agent a couple of times a day for several days and clamped the fitting to the star picket post so not to bend or break the pipe but noit still won't budge.
1. Front Tap - 220.1.22C.jpg1. Front Tap - 22.01.22D.jpg
-
22nd January 2022, 06:18 PM #2
First option I would take is to use two hammers, say a heavy one like a lump/brickies hammer behind the fitting then hit the gal plug square on from the front to try and break the bond and then if that didn’t work, I’d get the oxy torch out and heat but then I may as well replace it cause I get then braze a new fitting on, seeing that I’ve got an oxy torch there.
Cheers
DJ
ADMIN
-
22nd January 2022, 09:18 PM #3
GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 185
New fitting, even if you free up the gal one(you won’t) it will destroy the thread in the brass when you wind it out.
-
22nd January 2022, 10:23 PM #4
SENIOR MEMBER
- Join Date
- Oct 2015
- Location
- Ringwood, VIC
- Posts
- 133
I think it's a gonner as well, but possibly drill it out, increasing drill size until you are close.
Heat could help.
Or a longer cheater bar. What's the worst that can happen..
-
22nd January 2022, 11:11 PM #5
China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 140
I would replace the fitting whoever fitted that one over heated it and the joint will eventually fail.
-
22nd January 2022, 11:56 PM #6
Senior Member
- Join Date
- Jan 2005
- Location
- Campbelltown NSW
- Age
- 78
- Posts
- 68
Try tightening first, that can sometimes break the rust seal.
-
26th January 2022, 10:27 PM #7
My understanding about the council water line is that they own all the lines from there main line even if its in my yard and today I find out that I own what's in my yard even the water meter.
Now as easy fix, lop off the old fitting and fit a new brass fitting.
-
11th May 2022, 02:08 PM #8
2nd February and after this photo I cut the excess off the gal post and slapped on a gal cap.
1. Charlie - Front Fence Prep 12.02.22B.jpg
Similar Threads
-
Compression fitting taped - Should I remove?
By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 16th November 2008, 07:10 AM