![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
18th January 2024, 08:55 AM #1
New Member
- Join Date
- Dec 2009
- Location
- Nowra
- Posts
- 2
Adjusting Hitachi C8F8 Slide compound saw
Hi,
I bought this saw second hand and it is slightly out on the main axis can't cut right angles with it. I had a look but there seems no way of calibrating the saw. Anyone know about this saw?
Thanks for any help.
-
18th January 2024, 05:28 PM #2
Senior Member
- Join Date
- Jul 2019
- Location
- mid north coast
- Age
- 66
- Posts
- 353
I had a fairly new Metabo 216mm quite similar to the hitachi
I adjusted the fence to make it square as per instructions, yours could be the same
my aeg is completely different with adjustment on the turntable itself
I find its worth checking it for square often until you are satisfied it doesnt vary as some these beasts do