![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
16th November 2008, 07:03 AM #1
Merbau Screen - What screws do I use going into metal?
HI all,
I am about to knock up a screen using some left over Merbau I have from my deck. I originally was going to use some wooden posts as the support but today and my local Margent Mart I saw some galvanised fence posts that will doing very nicely. My concern is what screws I should use? I used 17g square drived screws for my deck - but I presume these won't cutit and I need a special screw for wood and metal.
Any advice would be super
More...
Similar Threads
-
Full screen/Part screen
By Big Shed in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 39Last Post: 16th January 2007, 12:28 AM -
metal poles for a screen
By Trav in forum LANDSCAPING, GARDENING, OUTDOORSReplies: 5Last Post: 26th February 2004, 01:57 PM