![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: best material for guttering
-
25th January 2008, 10:04 AM #1
Intermediate Member
- Join Date
- Jan 2006
- Location
- Melbourne
- Posts
- 38
best material for guttering
Hi forum,
I have to replace my house guttering and downpipes and am wondering what the best material to use is, and the difference, if any, between them.
How does zincalum compare to painted galvanised or colorbond? I've seen some painted PVC guttering on some houses around here but they seem to have sagging problems. Is this an installation issue or just what PVC guttering does and is anyone still using it?
Any advice will be appreciated.
-
25th January 2008, 10:26 AM #2
PVC and any other plastic guttering that I've seen usually sags between supports, it's the nature of plastics. Colorbond is better than zincalume as guttering because it tends to resist the acids etc that rotting leaves produce. If you keep your gutters clean then zincalume will last just as long. In order of longevity I'd rate guttering materials thus:
Stainless steel
Copper
Colorbond
Zincalume
Galvanized (painted or not)
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
25th January 2008, 05:27 PM #3
Colourbond is better than anything IMHO, but it's doesn't play nicely with lead flashing's
If you dont play it, it's not an instrument!
-
26th January 2008, 01:32 AM #4
Electrician
- Join Date
- Sep 2007
- Location
- Thailand
- Age
- 63
- Posts
- 90
In Thailand, only stainless steel is used as guttering.
“I do not think there is any thrill that can go through the human heart like that felt by the inventor as he sees some creation of the brain unfolding to success... Such emotions make a man forget food, sleep, friends, love, everything.” - Nikola Tesla.
-
26th January 2008, 08:17 AM #5rrich Guest
We get aluminum guttering here.
The guys come out with a truck and a machine. The machine forms the aluminum coil stock into a seamless gutter. The aluminum is painted with a powder coating system before being coiled. The most common colors are white and a poop brown.
The only joints in the entire system are where the down spouts are and corners. I've had these seamless gutters on the house for over 15 years without any problems.
-
13th April 2008, 07:06 PM #6
New Member
- Join Date
- Apr 2008
- Location
- sydney
- Posts
- 2
Colorbond is just painted zincalume,
you can also get colorbond,stainless and copper guttering formed on site (same machine)
Try to get more than the minimum number of brackets used.
-
13th April 2008, 09:32 PM #7
Senior Member
- Join Date
- Jul 2007
- Location
- Sydney-south
- Posts
- 333
Exactly, I think we've touched on this before.
I wouldnt get it extruded on site, the fellas who done a mates mums place hung a length of quad gutter 15m long without any expansion joints and used internal brackets, now it looks like a dogs breakfast due to not being able to expand.
I wouldnt even look at plastic.Plumbers were around long before Jesus was a carpenter
Similar Threads
-
Continuous guttering?
By hitachi230 in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 4Last Post: 1st October 2007, 11:09 PM -
PVC guttering
By knewey in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 14Last Post: 29th March 2004, 08:47 AM