![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: galvanised clouts
-
5th September 2009, 03:00 PM #1
galvanised clouts
Hi
just a quick one - I'm painting some external cladding which is fixed with flush galv clouts. I was planning on using an oil based zink primer to spot prime the nail heads but the chap at solver sold me galvalink instead which is a water based galv primer. it says on the can that it assists in preventing the white rust that sometimes appears on galv. I will paint over with duraguard but don't want rusty spots to come through in a few years. We live fairly close to the coast. Does anybody know wheather the galvalink will do the trick or should I use the zink primer.
Thanks
Read the full thread at RenovateForum.com...
Similar Threads
-
clouts in sub-floor
By bosco1 in forum FLOORINGReplies: 2Last Post: 20th March 2008, 08:49 AM