Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: GMF 6 inch junior need decal
-
7th June 2014, 04:36 PM #1
GMF 6 inch junior need decal
While trooling eBay ,
I came across this 6 inch GMF 6 inch bench grinder ImageUploadedByTapatalk1402118317.156316.jpg
Well $40 au and a ten minute drive it's all mine for the next 40/50 years anyway.
Needs one new bearing ,but will get two new ones while it's apart any way .
It run fine apart from the bearing having a tiny bit of play and was confirmed with my stethoscope ( no I'm not a doctor lol)
Sorry not to many pics as I've already stripped it down and am now waiting for a fresh paint job on the body bits to dry .
My only question is I would really like to restore the name plate.
Were, how ,would I go about this ?
Can I get new decal made at a sign shop .
Or how were they original done ?
It would be a shame for everything else looking nice and fresh and to re use the old one looking a bit saggy ImageUploadedByTapatalk1402119009.985480.jpg
Any ideas greatly received .
-
8th June 2014, 12:47 AM #2GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,488
I like the old one. It has a story.
A past life of many previous sharpenings.
Keep it.