![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 2 of 2
-
12th October 2011, 05:41 AM #1
New Member
- Join Date
- Oct 2011
- Location
- Nashville
- Posts
- 2
Found an old Wood and Metal trunk and need advice
I found this huge old trunk clad in some kind of metal with Wood bands on the outside reinforcing it. The trunk appears to be well over 100 years old and the old leather straps are long gone. The wood is in pretty good shape and the metal covering, though quite rusty is still intact and the black paint is visible in places. I'd like to make an end table out of it, mounting a pieice of beveled glass on the top. Before i do the glass top part though, of course i want to at least seal the wood and metal parts. I don't mind the rusty look, so i won't be painting it. I've already treated the wood with Murphy's Oil soap and then linseed oil. I put linseed on the back side of the metal just to see how it would react and i like the result. Eventually i think i would like to seal the whole thing with some laquer or varnish. Anyone have any suggestions on how to treat the metal and wood before sealing and also WHAT can i use to seal the metal that will give it a nice warm and semi glossy look ? Thanks !
-
12th October 2011, 06:47 AM #2
It's been a while since I looked at the range fully but you might try the 'International Paints' range. They do all sorts of specialist paints for all sorts of unusual jobs.
Dragonfly
No-one suspects the dragonfly!