Results 1 to 1 of 1
Thread: Vinyl wrap lifting
-
25th November 2008, 10:20 PM #1
Vinyl wrap lifting
Hi All
I bought a kitchen from a local business 3 years ago (flat pack). I didn't do the research as good as i should have. The cupboards and doors are chinese, one of the doors has started to lift off the panel. Not from the edge but in from the edge.
I went back to the company to discover they went bankrupt owing a lot of money. So i have had no luck with them.
Is there any way to repair this one door without replacing all of them. Can i get it to stick down again or get some glue under it, is there anything i can do.
I have been to other manufacturers and they cannot match the colour (its a gloss white).
I don't want to replace all the doors because of one dodgy door. The kitchen is fine apart from this one door.
Any ideas.
Colin
Read the full thread at RenovateForum.com...
Similar Threads
-
Can you paint Vinyl Wrap?
By kaboobie1109 in forum PAINTINGReplies: 7Last Post: 25th February 2008, 09:19 PM -
Trimming vinyl wrap panel
By DBACT in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 3Last Post: 3rd September 2007, 12:35 PM -
Vinyl wrap - plastic coating
By dalysan in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 4Last Post: 22nd April 2007, 09:39 PM -
Vinyl Wrap
By macca2 in forum KITCHENS, BATHROOMS, THEATRES, etcReplies: 7Last Post: 16th September 2004, 08:25 PM -
Vinyl wrap panels
By John G in forum BATHROOM & TOILETReplies: 7Last Post: 26th January 2004, 07:56 PM
Bookmarks