![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: WA day luck
-
1st June 2015, 08:38 PM #1
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 24,746
WA day luck
Usually when I go to my pile of scrap looking for pieces of steel plate everything is a few mm undersize so I'm forced to cut from a much larger pieces.
This arvo I needed a few pieces to make a motor bracket and the two mains pieces I needed were 200 x 250 x 6 and 200 x 280 x 5 or 6.
I quickly found the first piece to the mm while the the second piece took a bit of hunting but I found a piece that was 200 x 300 x 5.
That's probably my luck for the year but I'll take it.