Results 1 to 11 of 11
  1. #1
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default Timbermate - what am I missing

    Everywhere I look I see praise heaped upon Timbermate. This is my experience with the product.
    I use it to fill fine cracks in an object. I let it dry. Then I sand. About 25% seems to drop out of the cracks. I fill again. Sand again. Again, about 25% seems to come out. Of course now its 25% of 25% but still a bother. I fill again etc etc.
    Am I doing something wrong ? Is there some trick I'm missing ? Do other people find the same thing and just not mention it ?

    Arron
    Apologies for unnoticed autocomplete errors.

  2. #2
    Join Date
    Aug 2012
    Location
    Imbil
    Posts
    0

    Default

    How long are you letting it dry.
    Regards Rod.

  3. #3
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    85
    Posts
    632

    Default

    If they are fine cracks, you might need to thin a small amount down with a little water to a paste consistency so that it goes in easier
    Tom

    "It's good enough" is low aim

  4. #4
    Join Date
    Aug 2012
    Location
    Newcastle NSW
    Posts
    63

    Default

    I've noticed occasionally a similar thing, but not quite to that extent. I stopped having most of the problems when I started removing some from the tub, then mixing it with a little water (using a putty knife) to make a paste a bit thicker than toothpaste consistency. Slightly dampen the timber area where you want it placed, and pack it in firmly using a wiping action with the putty knife. I still somehow manage to get trapped air in there sometimes, so if it happens you have to work out the air.

    Leave it a bit longer than you think you should to fully set, and sand with maybe 180 or 240 grit gently.

    I seem to get reasonable results that way. Of course if you're using it a a grain filler, you want a pretty sloppy mix.
    "Come sit down beside me" I said to myself, and although it didn't make sense,
    I held my own hand as a small sign of trust, and together I sat on the fence.

  5. #5
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default There's something to try - dampening timber.

    I'll experiment with dampening the timber first. That I havent tried. It might help the bonding process, which I guess is what is not occuring.

    I've tried varying the other things mentioned (consistency, drying time) but without much noticeable result.

    I do know that if I sand gently I get a better result then when I give it a real good rogering with an ROS, but what good is a filler that you have to be deliberately gentle with - its only going to fall out sooner or later because it hasnt bonded.

    cheers
    Arron
    Apologies for unnoticed autocomplete errors.

  6. #6
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    Have you cleaned fine dust out of the cracks? A vacuum cleaner can help with that.
    Apart from that it's the consistency that seems to matter. If the cracks are fine use it thinner as suggested and wipe it in across the grain not with it.
    Cheers,
    Jim

  7. #7
    Join Date
    Sep 2012
    Location
    Ohio, USA
    Posts
    2

    Default

    All very timely words of advice. I gave up on other fillers and finally bought Timbermate. I'll be trying it out on a small project this weekend and I'll post my experience with it then. I'm sure there's a learning curve!

  8. #8
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    One thing, if you are matching for colour, I find that it tends to dry lighter than you might expect.
    Cheers,
    Jim

  9. #9
    Join Date
    Aug 2012
    Location
    Newcastle NSW
    Posts
    63

    Default

    Jimbur is absolutely spot on!

    And it goes much much darker than you would expect under oil-type finishes like tung, danish, scandinavian etc. Very noticeably darker than the adjacent wood!
    "Come sit down beside me" I said to myself, and although it didn't make sense,
    I held my own hand as a small sign of trust, and together I sat on the fence.

  10. #10
    Join Date
    Sep 2012
    Location
    Ohio, USA
    Posts
    2

    Default

    I just tried Timbermate for the first time yesterday and I think it's the best filler available. I mixed mine on the thicker side and had no problems. Since I'm filling in some drill bit false starts and other screw-ups, I'll need a second application. I even found that I can force dry it with my small table-top space heater for a little while to start setting up (it's cold and raining here where I live) and then let it finish drying overnight. It dried and hardened no problem. My guess is that you may have it too wet. Also make sure you pack it into your fill space and, if necessary, when dry, give it another layer. Keep at it...it works!

  11. #11
    Join Date
    Feb 2008
    Location
    Victoria
    Posts
    596

    Default

    Quote Originally Posted by antiphile View Post
    Jimbur is absolutely spot on!

    And it goes much much darker than you would expect under oil-type finishes like tung, danish, scandinavian etc. Very noticeably darker than the adjacent wood!
    I think we could do with a table showing which one suits which timber. I had to do a lot of filling of nail holes in an old baltic pine floor. Rimu gave me a near perfect match.
    Cheers,
    Jim

Similar Threads

  1. Timbermate Advice
    By Strungout in forum FINISHING
    Replies: 2
    Last Post: 14th September 2011, 10:58 PM
  2. How do you use your Timbermate
    By Arron in forum FINISHING
    Replies: 9
    Last Post: 3rd September 2011, 01:00 PM
  3. Timbermate and sanding sealer
    By Dengue in forum FINISHING
    Replies: 6
    Last Post: 29th January 2011, 10:28 PM
  4. Am I missing something?
    By Big Shed in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 9
    Last Post: 3rd May 2007, 11:59 AM
  5. Timbermate falls out
    By JupiterCreek in forum FINISHING
    Replies: 4
    Last Post: 9th August 2004, 08:04 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •