![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 4 of 4
Thread: Outdoor Furniture Finish
-
22nd February 2012, 10:27 PM #1
Intermediate Member
- Join Date
- Jan 2010
- Location
- Perth, WA
- Posts
- 0
Outdoor Furniture Finish
Hello All,
I appreciate this is probably been done to death before-
I have coated my (Indonesian timber) patio chairs with a 40%\60% pale boiled linseed\min turps coating.
A week later they look great, except, they're tacky to the touch (finish looks great as far as colour restore looks)
Any help with hints as to reducing the tackiness would be appreciated.
Kind regards
Grant
-
23rd February 2012, 09:02 AM #2
You can clean all the stickiness off with turps. Buy some terebine and add to the mix when you repeat, follow the instructions. You might also investigate a fungal growth inhibitor as linseed oil promotes fungus and will blacken the wood. Or just investigate a proprietary furniture oil.
Cheers
Michael
-
25th February 2012, 05:34 PM #3
Senior Member
- Join Date
- Apr 2011
- Location
- Brisbane
- Posts
- 9
As a further note to what Michael said, when you coated the chairs did you rub off any excess oil with a dry rag after about 20 min? If you leave the lnseed with appreciable wet sections on the surface itcan stay tacky
-
26th February 2012, 06:07 PM #4
Intermediate Member
- Join Date
- Jan 2010
- Location
- Perth, WA
- Posts
- 0
Many thanks for the replies.
Much appreciated.
Regards
Grant
Similar Threads
-
Outdoor furniture help
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 15th June 2010, 01:40 PM -
What finish to use on outdoor teak furniture?
By jzacc in forum FINISHINGReplies: 10Last Post: 22nd February 2006, 11:50 AM -
Outdoor furniture?
By himzol in forum FINISHINGReplies: 6Last Post: 14th September 2004, 09:34 AM