Page 9 of 11 FirstFirst ... 4567891011 LastLast
Results 121 to 135 of 153
  1. #121
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by doug3030 View Post
    I just cut the sawplate to fit the handle slot I cut the other day. Fits just nice. Happy with self.(Well I did it hours ago now but The forum still won't let me attach the photo. I will post it later if it ever lets me.)
    Doug,
    I am sure you are fully aware of some of the degenerate types that frequent these back lots of the forum.
    Myself proudly wearing such badge of honour.
    But due to you being my guest this fine Saturday for which I am very much looking forward to your fine company.
    I will not lower my self to mention anything to do about your slot.

    But of course on Saturday, will much appreciate a in depth discussion on said slot.

    Cheers Matt.

  2. #122
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by Bushmiller View Post
    Matt

    I have ordered some of those tile drills ( I thought I had better put my money where my mouth is) so at some time in the future I will have to report back on them. I have dealt with Smith & Arrow several times in the past mainly for sanding type products (flap discs, sander discs, angle grinder cutting discs etc) and other products including twist bits and have been very pleased both with the products and the level of service.

    At one time S & A were a Forum sponsor too, but a quick perusal of the sponsors no longer shows them listed.

    Regards
    Paul

    (Disclaimer: No personal or financial connection to this company)
    Paul,
    Last night I almost pulled the button on one of those fancy drill bits.
    Under $10 that’s ok but I was getting nearly $20 at checkout.
    That’s $10 for postage.

    I am most looking forward to your report.

    Cheers Matt,

  3. #123
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Quote Originally Posted by Simplicity View Post
    Paul,
    Last night I almost pulled the button on one of those fancy drill bits.
    Under $10 that’s ok but I was getting nearly $20 at checkout.
    That’s $10 for postage.

    I am most looking forward to your report.

    Cheers Matt,
    I bought sufficient to qualify for free postage ( and a free gift too I think).

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  4. #124
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Here's the photo I owed from yesterday:

    20190401_162416.jpg

    Looks like I have full functionality of the forum back at last.
    I got sick of sitting around doing nothing - so I took up meditation.

  5. #125
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    I cut off a small piece of sawplate and drilled a hole through it ok. I took a picture but I still can't post it
    I got sick of sitting around doing nothing - so I took up meditation.

  6. #126
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Quote Originally Posted by doug3030 View Post
    I cut off a small piece of sawplate and drilled a hole through it ok. I took a picture but I still can't post it
    Is that because there is nothing in the hole?

    Regards
    Paul

    PS. What type of drill did you use?
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  7. #127
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Bushmiller View Post
    Is that because there is nothing in the hole? RegardsPaulPS. What type of drill did you use?
    Actually, there's a saw-nut in the hole. I used one of my Cobalt bits and a drop of cutting oil.I was going to try to draw back the temper a bit to make it softer but I thought I would try it "as is" and there was no problem.Earlier I drew back the temper on half of the piece I cut off the corner of the big Disston I am rehandling and found that I could drill through that. Before I got too excited, I realized that Mr Disston may have already tempered that part of the sawplate before drilling the holes for the old handle. I found that I could also drill through the end I had not tempered, so still not sure I achieved anything by heating that part up to 400 degrees C except that I did not damage it in any way by doing so. I wish they would fix the forum so I could post pictures again.
    I got sick of sitting around doing nothing - so I took up meditation.

  8. #128
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Doug

    This is how Henry's boys did it:

    https://www.criticalpast.com/video/6...ure-cast-steel

    It's a very short 57 sec video (hardly worth breaking out the beer)and not very clear. Actually I am not sure whether they are punching the plate using the handle with holes already drilled as the pattern or whether the "stems" are drills. Unfortunately the clarity is so poor I can't really see, but I am leaning towards the plate being punched. I think this is the way the holes were made as there is usually as distinct burr on the reverse side of the plate that is conducive with punching as opposed to a slight burr resulting from drilling.

    The first few seconds before the punching/drilling operation demonstrate how wheat carving was achieved. Early models (before 1890s?) were carved by hand, but Disston were quite progressive in utilising machines to speed up production.

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  9. #129
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Bushmiller View Post
    DougThis is how Henry's boys did it: ...
    Thanks Paul,When I regain the ability to make something happen when I click the "thanks button" I might have a bit of work to do.Interesting video, but as you say not very clear. I guess Old Henry didn't want to give away too many secrets.
    I got sick of sitting around doing nothing - so I took up meditation.

  10. #130
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by Bushmiller View Post
    Is that because there is nothing in the hole?

    Regards
    Paul

    PS. What type of drill did you use?
    O dear Paul,
    All holes have matter it’s just a mind set.

    Matt,

  11. #131
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Doug

    You are right and the Disston empire was quite secretive. There are still a couple of aspects in the blade process that have not been revealed. Only Houdini had more secrets in fact. The other aspect is that the video is for sale and the inference is that the copy you buy can be HD or SD and is higher quality (where have I seen that sort of marketing before ). $150 to $170 is a bit steep I would have thought and I think that is large American dollars, not dainty Aussie dollars.

    Anyhow, if you care to keep looking there are four other Disston clips. I re-read the information on the clip I posted and I got it entirely wrong. There are two sets of drill clusters, which also incorporate the counter bore for the head (and medallion) of the saw screw. The employee drills one side, flips the handle, moves across to the other cluster and drills the "flip' side. He completely drills two handles in twenty seconds!



    How long does it take us?



    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  12. #132
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    74
    Posts
    1,761

    Default

    Quote Originally Posted by Simplicity View Post
    O dear Paul,
    All holes have matter it’s just a mind set.

    Matt,
    You are right on top of this. Your parents clearly had a premonition naming you Matt (I am assuming that it was short for Matter).



    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  13. #133
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Bushmiller View Post
    How long does it take us?
    How long it takes me is immaterial (there's that matter again). I am doing it for fun and enlightenment not for profit.

    Here's a piece of 1095 with a hole drilled through it with a cobalt drill - The fact that I can post it means I have the power to post pictures again and smilies.

    20190402_145457.jpg
    I got sick of sitting around doing nothing - so I took up meditation.

  14. #134
    Join Date
    Sep 2017
    Location
    Doreen, Victoria
    Age
    19
    Posts
    31

    Default YOUR ATTENTION PLEASE, your attention.

    Hi all, I will be there. Conveniently I am on a camp in Ballarat till Friday, so we’ve booked for another night. Me and mum will come, though I am not sure whether or not she’ll stay the whole day.

    If she doesn’t stay I’ll need a drop off at the station


    Also the stuff from Blackburn arrived yesterday, but I don’t have any actual tools with me. Can I borrow some of yours on the day?

    See you then.

  15. #135
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by Benny_ View Post
    Hi all, I will be there. Conveniently I am on a camp in Ballarat till Friday, so we’ve booked for another night. Me and mum will come, though I am not sure whether or not she’ll stay the whole day.

    If she doesn’t stay I’ll need a drop off at the station


    Also the stuff from Blackburn arrived yesterday, but I don’t have any actual tools with me. Can I borrow some of yours on the day?

    See you then.
    Not a problem with mum, or a lift Benny
    An I’m sure we can sort you out with some tools for the day .

    Cheers Matt

Similar Threads

  1. pay attention!
    By choppit in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 6
    Last Post: 12th September 2013, 12:33 AM
  2. Due care & attention.
    By Cliff Rogers in forum JOKES
    Replies: 0
    Last Post: 18th September 2006, 11:29 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •