Woodies BBQ Gold Coast QLD

[Toolin Around]

A number of woodies were asking what a panel raising plane was for. So I figured a couple pics was worth a few thousand words...

The first pic shows what i was trying to describe in how the plane rides along the wood and forms the profile. In the pic the left side of the plane rubs on the top of the panel and the right side rubs on the bench. When the plane "bottoms" out on both sides you're done. It's important that the panel is flat on the bench or you'll end up with some parts thinner than desired. You can see that the skewed blade works well on end grain also.

Pic two not much to say, it shows the final result.

[Ivan in Oz]

Gee,

I was only trying to be polite.

Wasn't interested at all



Unless it was mine,
AND
I knew how to use it
Picture is worth 10^3 Words

[RufflyRustic]

Ah Ha! Thanks Matt!

Sorry Peter, but you were too good to miss with a pose like that

Carl - yes, it sure did smoke a bit, but it blew away pretty quickly.

cheers
Wendy