Watcha Dooen in Dooen 2018 ... Australia Day Weekend

[doug3030]

I'll be there.

Bringing a lathe and hopefully a heap of Olive Burl blanks for sale. If anyone wants specific sizes cut let me know, but I currently plan mainly 200-300 dia x 75-150 thick, 75SQx350, 50sqx150, pen blanks and scraps

Hi Neil,

I'm still looking for that elusive nice piece of olive for a mortar and pestle. Something around 200mm diameter and at least 150 thick would be wonderful for the mortar, I would probably want something a bit bigger than 50x50x150 for the pestle though, if you finish up with a suitable piece, otherwise I can make do with 75x75 and I can cut a couple of pen blanks off of it as well (oops - did I say that out loud )

Cheers

Doug

[Simplicity]

Hi Neil,

I'm still looking for that elusive nice piece of olive for a mortar and pestle. Something around 200mm diameter and at least 150 thick would be wonderful for the mortar, I would probably want something a bit bigger than 50x50x150 for the pestle though, if you finish up with a suitable piece, otherwise I can make do with 75x75 and I can cut a couple of pen blanks off of it as well (oops - did I say that out loud )

Cheers

Doug

I just new it.
Yep definitely some black magic or sorcery going on in this forum.

I just new it.

Cheers Matt

[DaveTTC]

Another update

With less than 3 weeks to go plans are coming along nicely. In no particular order some of those coming include

Simplicity & Sally
Oldgreybeard & Maureen
Doug3030 & Jules
DougCarr
Rwbuild & Wayne
UncleAl
Benny_ & his family (not sure, mum dad and a sibling?)
Kbpensnmore
DaveTTC, Raechell, Tyler, Sammy & Tommy
David Mitchell will be up Sat or Sun
Dia Sensei plus one
Treecycle

Some im not sure of
Brendan Stemp
Geof Ford
Gabriel definite wannabe. Will if he can
Cuffy

There will be some from my local woodturning club and maybe a few from Jerilderie area too.

Add to that we have our homeschoolers


DaveTTC
The Turning Cowboy
Turning Wood Into Art

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[DaveTTC]

Getting closer.

Getting a good feeling about cuffy. Je should be there.

David Mitchell will be up from Arrarat on Saturday. He'll have some interesting projects to share along with plans and maybe even a demo

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[Oldgreybeard]

Sorry to have to pull out due an unexpected death in the family. As the coroner is involved, the funeral is likely to be late next week.
Hope you all have an enjoyable few days.

Regards
Bob

[doug3030]

Sorry to hear the bad news Bob, hope that all goes as well as it can in these kind of circumstances

Doug

[Simplicity]

Sorry to have to pull out due an unexpected death in the family. As the coroner is involved, the funeral is likely to be late next week.
Hope you all have an enjoyable few days.

Regards
Bob

Sorry to hear the sad news Bob,
Condolences to the family

Matt/Sally

[rwbuild]

Sorry to have to pull out due an unexpected death in the family. As the coroner is involved, the funeral is likely to be late next week.
Hope you all have an enjoyable few days.

Regards
Bob

Condolences to all concerned

[DaveTTC]

Sorry to have to pull out due an unexpected death in the family. As the coroner is involved, the funeral is likely to be late next week.
Hope you all have an enjoyable few days.

Regards
Bob

You will ne missed. Thoufhta with you and Maureen. Take care

DaveTTC
The Turning Cowboy
Turning Wood Into Art

[dai sensei]

Hi Neil,

I'm still looking for that elusive nice piece of olive for a mortar and pestle. Something around 200mm diameter and at least 150 thick would be wonderful for the mortar, I would probably want something a bit bigger than 50x50x150 for the pestle though, if you finish up with a suitable piece, otherwise I can make do with 75x75 and I can cut a couple of pen blanks off of it as well (oops - did I say that out loud )

Cheers

Doug

The burl seems to be 4 trunks/burls connected by a crap load of tangled roots. I took my first slice today between two burls and it took 3 sharpens as I hit a heap of dirt pockets (black bits in photo). So I've ordered a TCT chain for my chainsaw and hope I can get it cut up in time but I'm not sure.
first cut with dirt.jpg

The bandsaw has been fitted with a new 1" TCT blade I ordered but I had to make up a new guide system as the one on the bandsaw was not adjustable and only suited a 10mm blade.

[doug3030]

The burl seems to be 4 trunks/burls connected by a crap load of tangled roots. I took my first slice today between two burls and it took 3 sharpens as I hit a heap of dirt pockets (black bits in photo). So I've ordered a TCT chain for my chainsaw and hope I can get it cut up in time but I'm not sure.

The bandsaw has been fitted with a new 1" TCT blade I ordered but I had to make up a new guide system as the one on the bandsaw was not adjustable and only suited a 10mm blade.

Bring it via my place Neil - 21 inch bandsaw with 1" 2tpi tungsten carbide blade.

[DaveTTC]

Its getting closer. Hope everyones plans are going well. A scorcher here today and tomorrow. 41 and 44°

Fortunately only in 30ies for the weekend at this stage


DaveTTC
The Turning Cowboy
Turning Wood Into Art

[crowie]

Keep cool gents.

[Benny_]

40 where I am already and 42 tomorrow! Too hot for me

[DaveTTC]

40 where I am already and 42 tomorrow! Too hot for me

We gonna need icecream for the weekend

DaveTTC
The Turning Cowboy
Turning Wood Into Art